Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

32" tires on 3.75 BS

Thread Tools
 
Search this Thread
 
Old Nov 14, 2010 | 09:26 PM
  #1  
sixty7rs's Avatar
Thread Starter
Newbie
 
Joined: Oct 2010
Posts: 4
Likes: 0
From: Chicago
Year: 2001
Model: Cherokee
Engine: 4.0
Default 32" tires on 3.75 BS

Hey guys I've tried the searches but couldn't really find my answer, my 01 cherokee has a 4.5 lift I just sold my 31x1050x15 TSL and am looking to install 32x1150x15 cooper stt with these wheels http://www.jcwhitney.com/series-1069...29d1163y2001j4 will the 3.75 backspace make the tires stick out to far pass my stock flares, I do very little wheeling... anybody out there running 32" with 3.75 BS would you post your pics... I'm pretty sure its been asked before,
Reply
Old Nov 14, 2010 | 09:53 PM
  #2  
winston427's Avatar
CF Veteran
 
Joined: Feb 2009
Posts: 5,900
Likes: 10
Model: Cherokee
Default

The 15x8 rim with a 11.50 tire width should not stick out to far. I am running 33x12.50s on a 15x10 rim with 3.75 back spacing and they do stick a little to far. Makes it easy for my hungry fenders to chew on some rubber when flexing the suspension. A 15x8 with 4 inch back spacing would be more prefered, that's what I will be going with when the time comes to buy my next set of tires.
Reply
Old Nov 15, 2010 | 05:23 PM
  #3  
sixty7rs's Avatar
Thread Starter
Newbie
 
Joined: Oct 2010
Posts: 4
Likes: 0
From: Chicago
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Thanks for the info, I had my mind made up, ready to put my order in, only to start second guessing myself, anybody else with some input
Reply
Old Nov 15, 2010 | 06:29 PM
  #4  
Reefmike's Avatar
Member
 
Joined: Jul 2010
Posts: 236
Likes: 0
From: Fort Worth, Texas
Year: 1998
Model: Cherokee
Engine: 242/4.0 I6
Default

3.75" bs should keep you from rubbing the LCA's at full steer.
Here's a pic of 30x9.50 on 3.75" bs -

Reply
Old Nov 15, 2010 | 09:10 PM
  #5  
Deanxj97's Avatar
Member
 
Joined: Oct 2010
Posts: 191
Likes: 0
From: Hebron,KY (cincinnati area)
Year: 1997
Model: Cherokee
Engine: 4.0L I6
Default 32" tires and 3.75 BS

That Is the same set up I have, just different rims, same BS tho. They don't stick out to far..... But they did rub on my 97 so I did a little trimming on the stock fenders and I'm going to get spacers, but I do a lot of wheeling so trimming might just work for you.
Reply
Old Nov 15, 2010 | 09:19 PM
  #6  
alloutperform's Avatar
CF Veteran
 
Joined: Nov 2010
Posts: 1,140
Likes: 1
From: cape cod ma.
Year: 1998
Model: Cherokee
Engine: 4.0 i6
Default

i'm running 5ish lift and 31" swampers on stock 15x8 wrangler wheels they measure like 4.5in backspace and it is too much they hit my lower control arms... build pic but here:

Reply
Old Nov 16, 2010 | 11:18 AM
  #7  
sixty7rs's Avatar
Thread Starter
Newbie
 
Joined: Oct 2010
Posts: 4
Likes: 0
From: Chicago
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Thanks for all the help Guys, but i just pickup a set of moabs including the spare off of craigslist.. but now I have a new question the 245/75-16 look way to small with my 4.5 lift. Ive seen some cooper stt 31/1050-16, but I really want something closer to a 32" tire any suggestions?
Once again thanks alot for your replys on my previous questions....
Reply
Old Nov 16, 2010 | 12:24 PM
  #8  
magator's Avatar
Member
 
Joined: Oct 2010
Posts: 129
Likes: 0
From: New York
Year: 1994
Model: Cherokee
Engine: 4.0
Default

I went with 33x10.50x15 BFG KM2s on 8X15 Xtream alloys w/ 3.75 BS. Needed to cut 1" off rear end of front flair. Sticks out about 1" past flair. 12.50"s should stick out about an inch more with more cutting. Its a 94 XJ with a 4.5"lift.

Last edited by magator; Nov 16, 2010 at 12:26 PM.
Reply
Old Nov 16, 2010 | 12:37 PM
  #9  
Reefmike's Avatar
Member
 
Joined: Jul 2010
Posts: 236
Likes: 0
From: Fort Worth, Texas
Year: 1998
Model: Cherokee
Engine: 242/4.0 I6
Default

Originally Posted by sixty7rs
Thanks for all the help Guys, but i just pickup a set of moabs including the spare off of craigslist.. but now I have a new question the 245/75-16 look way to small with my 4.5 lift. Ive seen some cooper stt 31/1050-16, but I really want something closer to a 32" tire any suggestions?
Once again thanks alot for your replys on my previous questions....
Bigger tires may look good but right now you've got room for some serious flexing. Take it to the trail, disconnect the sways, and let 'er rip!
Reply
Old Nov 16, 2010 | 12:39 PM
  #10  
alloutperform's Avatar
CF Veteran
 
Joined: Nov 2010
Posts: 1,140
Likes: 1
From: cape cod ma.
Year: 1998
Model: Cherokee
Engine: 4.0 i6
Default

same issue i have i just ordered 32x11.50 15s for mine i went with hankook dynapro rt03 m/t's i would highly recommed then in a 265/70-16 i think....
Reply
Old Nov 16, 2010 | 03:08 PM
  #11  
Deanxj97's Avatar
Member
 
Joined: Oct 2010
Posts: 191
Likes: 0
From: Hebron,KY (cincinnati area)
Year: 1997
Model: Cherokee
Engine: 4.0L I6
Default

Maybe try LT265/75R16 that equivalates to 32x10.50 which shouldnt rub. check out mickey thomsons website, BAJA ATZ's it shows what sizes equivalate to
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
13
Oct 4, 2015 10:52 PM
Spinich
Jeep Builds
9
Sep 18, 2015 01:34 PM
mitchbacon12
Modified XJ Cherokee Tech
3
Sep 15, 2015 08:01 PM
RedStar
Modified XJ Cherokee Tech
10
Sep 9, 2015 12:45 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Sep 7, 2015 11:30 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 12:49 PM.