3" rustys and heavy load ?
#1
Newbie
Thread Starter
Join Date: Jun 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
3" rustys and heavy load ?
Hello,
Sorry for my english.. I'm from France...
I have a 4.0L XJ year 1992 and I have to buy new leaf springs, and lift a little.
My XJ ride with LPG? (gas) so I have the gas tank (80 litres) behind the rear seats.
I have seen the Rustys suspension kit 3" (with rear leaf springs, not aad) and I'd like to know if the leaf springs will stay at 3" for a long time...or if it's better to buy a OME 2" kit (it look stonger)
Thanks for your opinion
Sorry for my english.. I'm from France...
I have a 4.0L XJ year 1992 and I have to buy new leaf springs, and lift a little.
My XJ ride with LPG? (gas) so I have the gas tank (80 litres) behind the rear seats.
I have seen the Rustys suspension kit 3" (with rear leaf springs, not aad) and I'd like to know if the leaf springs will stay at 3" for a long time...or if it's better to buy a OME 2" kit (it look stonger)
Thanks for your opinion
#2
Newbie
Thread Starter
Join Date: Jun 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I've also seen a rubicon express kit (3.5" super ride) with extreme duty leaf springs... as anyone have this kit (or rustys or over...) to tell me if the lift is ok afer many months ?
Thanks
Thanks
#3
Newbie
Join Date: Jun 2009
Location: Fairfax, Va
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 I6
I have the Rustys 3 inch rear add a leafs on my Jeep and they have over 100,000 miles on them and havent sagged yet. Rustys is a good decision to make unless you want to spend alot of money elsewhere. I hope this helps you.
#4
Newbie
Thread Starter
Join Date: Jun 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I think ome is too expensive for me, I'm looking for Rustys 3" or RE 3.5"
If anyone whant to tell me how his lift kit resist to heavy loads and if the lift stay constant in the time...
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)