3.5in robicon lift Q
Thread Starter
Member
Joined: Jan 2009
Posts: 130
Likes: 0
From: Long Beach CA
Year: 1995
Model: Cherokee
Engine: i6
if i were to get this lift
http://www.4wheelparts.com/prodDetail.aspx?partNo=R/ERE6025&jeep-parts=true what other itomes would i kneed to buy to complet the lift
Senior Member
Joined: Sep 2008
Posts: 688
Likes: 1
From: Nashville, TN
Year: 2000
Model: Cherokee
Engine: 4.0L HO
shocks not included in the RE kit. may need an SYE (slip yoke eliminator) for the transfer case to get rid of vibrations from steep rear driveshaft angle. front end alignment after the lift.
CF Veteran
Joined: May 2009
Posts: 6,328
Likes: 1
From: SLC, UT
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
i got the same lift kit your gonna need extended brake lines $100 for all the extra droop (strech) you'll have! Also you'll need a extrem drop pitman arm $100, & a t-case 1" drop kit also about $100 that way your not always going through u-joints!!!
CF Veteran
Joined: May 2009
Posts: 6,328
Likes: 1
From: SLC, UT
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
the slip yoke eliminator is the beter way to go but the t-case drop kit will do the job & its cheaper!!!
Senior Member
Joined: Jan 2009
Posts: 545
Likes: 1
Year: 1994
Model: Cherokee
Engine: 4.0L Air Intake and TB Spacer
Wow you spent way to much money. How about straighten your front hardlines and remount them about 4" lower (free), you won't and shouldn't get a drop pitman arm (free), go to the hard ware store and get some 1" square pipping and bolts, drill as needed and use as your TC drop (less the $20)
Trending Topics
Senior Member
Joined: Jan 2009
Posts: 545
Likes: 1
Year: 1994
Model: Cherokee
Engine: 4.0L Air Intake and TB Spacer
CF Veteran
Joined: May 2009
Posts: 6,328
Likes: 1
From: SLC, UT
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
Wow you spent way to much money. How about straighten your front hardlines and remount them about 4" lower (free), you won't and shouldn't get a drop pitman arm (free), go to the hard ware store and get some 1" square pipping and bolts, drill as needed and use as your TC drop (less the $20)
Thread Starter
Member
Joined: Jan 2009
Posts: 130
Likes: 0
From: Long Beach CA
Year: 1995
Model: Cherokee
Engine: i6
im also thinkin about a 3 in rough contrey im looking at doing alot of trail driving like destert style i only have a grand to spend so im looking for a desint lift for cheep and will do what i what it to do
i have to purchise it by tomarow
i have to purchise it by tomarow
Last edited by motogpman2006; Jun 17, 2009 at 03:58 PM.
CF Veteran
Joined: Mar 2009
Posts: 2,750
Likes: 3
From: Visalia, Kalifornia, ussa
Year: 1996
Model: Cherokee
Engine: 4.0
What are you planning on tires and are they included in the $1000? Personally if I was going to spend $1000 max I would shop very carefully. 3.5" lift min parts list, Coil Springs, Rear Leaf Packs, Track bar, Shocks, TC Drop, Brakelines F&R, 30-31" tires, sway bar disconnects..
my 91 had a RC lift on . pretty decent lift . flexed pretty decent and came with the shocks . very reasonably priced aswell .. the shocks are a bit rough though . but a good choice .


