2wd conversion progress
05-25-2011, 07:01 AM
#1
Newbie
Thread Starter
Join Date: Apr 2011
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
2wd conversion progress
So I'm slowly gathering parts for the conversion to 4wd. I scored both driveshafts for less than thirty dollars at pullapart. (there are three within 10 to 25 min. from me). Shifter assembly and linkages also bought.
Currently, my vehicle is a 96 2wd manual. I'm not concerned with bolting the large items up, it's the wiring I'm concerned about. I pulled the entire wiring harness,fuse box, pcm and tcm off of a 93 4wd. Does anybody have any knowledge if this is going to be a real pain when I swap the electrical components?
thanks
Currently, my vehicle is a 96 2wd manual. I'm not concerned with bolting the large items up, it's the wiring I'm concerned about. I pulled the entire wiring harness,fuse box, pcm and tcm off of a 93 4wd. Does anybody have any knowledge if this is going to be a real pain when I swap the electrical components?
thanks
Thread
Thread Starter
Forum
Replies
Last Post
The Aristocrat
Wanted
2
02-25-2017 01:17 AM
sjm79902
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-30-2015 11:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)