2001 exhaust bolt repair/replacement
#1
Member
Thread Starter
Join Date: Feb 2013
Location: NorthEast Ohio
Posts: 174
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
2001 exhaust bolt repair/replacement
I was wondering what everyone does with the three exhaust bolts that connect the twin minicat piece to the rest of the exhaust. I haven't touched them yet but the bolts are SO thin and rusted there is absolutely no way I can imagine them coming off without taking a cutoff wheel or something to them. Suggestions other than cutoff wheel or is it as good as any?
So once things are apart what is the best way to put them back together again? I'm guessing drill out the holes (assuming I can identify them ) and bolt and nut but just wanted to make certain there were no wiser ways.
So once things are apart what is the best way to put them back together again? I'm guessing drill out the holes (assuming I can identify them ) and bolt and nut but just wanted to make certain there were no wiser ways.
Last edited by IGeeky1; 03-25-2013 at 09:57 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
BlvdKreeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-08-2015 04:03 PM
Soilman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 07:51 AM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-05-2015 07:56 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)