bigboy813

I have known about this since i have had the vehicle i really love my xj im in college with no job and i need a fast way out before my car is junked with roof rust anyone out help me idk what to do.

nicksdsm

After last years snow storms my roof started to rust. I went to the pawn shop and bought a palm sander for $15. I them went to home depot and bought sand paper and 2 cans of black gloss spray paint. I think all together it cost my under $15-$20. It took about 2hrs for me to sand down the entire roof, wipe everything down and put 3 coats of spray on.

7urtle

i just borrowed a grinder and painted with rustoleum

stuck like chuck

iused napa brand rhino liner

1997_Sport

Almost what he said....get a sander, get some 80 grit sand paper and then some 400 grit.

Sand all the spots with rust, or with rust under it to bare metal with the 80 grit, then take the 400 to the paint to get the clear off, try not to go down to bare metal...

This next part the paint process is what will be the key to it EVER lasting long. Prep it good, clean the surfaces...then you HAVE to prime it....now you really should echi-prime the bare metal, then regular prime over that....but you can probably get away with a just primer...then paint.

stuck like chuck

oh and to fill my big holes what i did was got fiberglass bondo and sheets of fiberglass. (mine isnt a dd so didnt really care). came out good

bigboy813

to bare metal ?

bigboy813

my roof is defiantly gonna be screwed if i dont take care of it soon but i looked in the gutter and it starting to rust pretty good i took my house key and chipped some paint off and its starting to rust under the paint so i will need to go bare metal becasue the whole roof is rusting

and can i mabie get a picture of your roof to see what it looks like

Red88

get some rust converter/ rust dissolver sold at your local hardware store or autoparts store often marketed as naval jelly its really phosphoric acid. Anyway sand or grind the pant off wherever there is surface rust and then paint some naval jelly on there let it sit for about 10-15 minutes but not much longer. This stuff chemically converts the rust to ferric phosphate which is black instead of red and will stuff the rust from spreading any further. If you just sand off the loose rust and paint over it you will slow the rust but it will come back. Completely grind all rust away to bare metal prime and paint or use Naval Jelly then prime and paint.

Destination XJ

Get a pic that would help, also You will have to sand till the rust is gone. If there is no sign of rust you should be good Just sand it lightly so the new paint sticks good.

bigboy813

my xj apparently has ****ty chrysler paint so what i have read is the paint cracks which is true on my jeep then rust bubble appear which is also true
im going to take picks know brb


damint i dont have a camera currently

trans_am7935

yea i would actually get a roll on primer that you can use a roller and brush to paint on cause they make some awesome bust rust primer. then you can sand down the primer and paint it a few coats and should be good.

bigboy813

can i get a link ?