2000 cheokee sport 4.0 cam position sensor location?
#1
Newbie
Thread Starter
Join Date: Mar 2010
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
2000 cheokee sport 4.0 cam position sensor location?
Where exactly is this sensor located? Got code P340...Bank 1 circuit malfunction. I had 303 first...cyl 3 misfire, changed plugs & wires...
tried starting , got p340...re-checked all connectors, got car to start .
2 days later went to start car, wont start, no codes for many attempts, then p340 came back again....
Loose connection or bad sensor???
Any input appreciated!!
tried starting , got p340...re-checked all connectors, got car to start .
2 days later went to start car, wont start, no codes for many attempts, then p340 came back again....
Loose connection or bad sensor???
Any input appreciated!!
#2
Newbie
Thread Starter
Join Date: Mar 2010
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
It was the Cam position sensor. Located in center of engine( right side)...right above starter. I didnt need to replace plugs & wires....the sensor was throwing the #3 cylinder misfire code...researched and found this is a typical code associated with sensor problem....
Thread
Thread Starter
Forum
Replies
Last Post
GregB58
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-28-2015 08:30 AM
OGCollard
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
08-27-2015 08:11 AM
smithj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-23-2015 12:14 PM
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 08:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)