|
1989 Jeep Cherokee 4 channel install
hi, I have a 1989 XJ and i was wondering if anyone could help me with the install. I have had a lot of experience with car audio so i'm not stupid in this area. I have run power, ground, RCAs and remote wires to my four channel amp. now the amp has two sets of RCA inputs, one for channels A and B and the other for C and D, the amp also has a High Input. Now i when i connect the RCA, only bass is played through the speakers. help:mellow:
|
ideas...
if you have a newer model receiver/deck scroll through your audio options to check to make sure that if it has a built in crossover the low pass filter isn't selected for the specific channel pushing your speakers. if that's not the issue double check that your not using the sub out if it is so equipped. the only thing left after those two options is the amps built in crossover - same thing with the low pass filter on that. i'm out of ideas so if that doesn't work some one else might chime in
|
Originally Posted by muddpigg
(Post 245493)
if you have a newer model receiver/deck scroll through your audio options to check to make sure that if it has a built in crossover the low pass filter isn't selected for the specific channel pushing your speakers. if that's not the issue double check that your not using the sub out if it is so equipped. the only thing left after those two options is the amps built in crossover - same thing with the low pass filter on that. i'm out of ideas so if that doesn't work some one else might chime in
|
you guys are correct but its not the option on the deck its a switch on the amp that says LP (low pass) Full or Off and then a HP (high pass) usally this is set to LP which would make it so only bass is playing you want it on full or off which ever it is on your amp
|
| All times are GMT -5. The time now is 09:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands