1988 XJ Multifunction lever
12-30-2018, 07:17 PM
#1
Newbie
Thread Starter
Join Date: Oct 2017
Location: Montana
Posts: 16
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1988
Model: Cherokee (XJ)
Engine: 4.0L
1988 XJ Multifunction lever
1988 Cherokee Laredo, anyone remember if the multifunction lever (turn sig., wiper, no cruise) just snaps in? Mine broke around the rubber insulator, not sure if I can get the remainder out without pulling the steering wheel (did this a while back to fix tilt but don't remember how the lever came out), will try to get it out if it just snaps in otherwise will pull wheel, etc. to get at it.
Thanks.
Thanks.
12-31-2018, 10:10 AM
#4
Newbie
Thread Starter
Join Date: Oct 2017
Location: Montana
Posts: 16
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1988
Model: Cherokee (XJ)
Engine: 4.0L
Thanks. Don't know if there is enough room for me to grab the stub with needle nose pliers but will try. A bit chilly here in MT, would rather not pull the steering wheel if I can avoid it.
Thread
Thread Starter
Forum
Replies
Last Post
Hcruse
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
02-20-2019 08:12 AM
EVILXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
12-16-2011 06:37 PM
roughridenxj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
06-05-2011 03:26 PM
xj92
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
01-14-2009 03:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
