Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)
-   -   01 cherokee (https://www.cherokeeforum.com/f2/01-cherokee-201236/)

will01xj 10-30-2014 02:26 AM

01 cherokee
 
Just purchased an 01 Cherokee. While driving home going about 70mph the vehicle died. The oil pressure gauge shook a little bit but no low pressure alarms came in. Started back up like nothing was wrong. Did it again about 30 minutes later and upon restarting the no key present light came in then cleared. It has the sentry key system. Was wondering if anyone had any similar problems or insight on the possibility of the problem.

93_xjcherokee 10-30-2014 02:31 AM

Crank sensor

kampcool 10-30-2014 04:18 AM

:thumbup1: +1 on what 93xj just said.

salad 10-30-2014 06:49 AM

Get it scanned for pending codes first. Crappy SKIM can do the same thing.

will01xj 10-30-2014 03:28 PM

Thanks for the help

will01xj 11-06-2014 04:58 PM

Code p1694
 
Posted recently about having an issue with my jeep dying randomly and security key light coming on. Well at work it died after about 3 minutes running and wouldn't restart. Security key light stays lit and odometer reads "no bar". Had to tow it out next day. Ran long enough to get on trailer then died again. Have tried to start a few times and if it does start it will run for about 3 min then die and not restart. Checked codes and getting P1694. Replaced cps and no change. Also new battery. I'm really thinking its pcm or skim related. Was thinking about sending pcm off to get skim delete. Any ideas?

CCKen 11-06-2014 06:09 PM


Originally Posted by will01xj (Post 2969120)
Posted recently about having an issue with my jeep dying randomly and security key light coming on. Well at work it died after about 3 minutes running and wouldn't restart. Security key light stays lit and odometer reads "no bar". Had to tow it out next day. Ran long enough to get on trailer then died again. Have tried to start a few times and if it does start it will run for about 3 min then die and not restart. Checked codes and getting P1694. Replaced cps and no change. Also new battery. I'm really thinking its pcm or skim related.


Was thinking about sending pcm off to get skim delete. Any ideas?

Do it.

Unass that SKIM crap.


All times are GMT -5. The time now is 09:48 PM.


© 2024 MH Sub I, LLC dba Internet Brands