00' wont stay running when cold
#1
Newbie
Thread Starter
Join Date: Oct 2008
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
00' wont stay running when cold
I have a 2000 jeep cherokee sport 4.0l ...with the current cold weather the jeep will turn over fine but wont stay idle and will imediatly stall out .... if i give it some gas it will fire up but only stay running when i have it idle'n over 1000rpms ....as soon as i let off the gas the jeep dies out and stalls ...Once the jeep is warmed up it doesnt do any of this at all and runs fine.... any ideas .....???
#4
CF Veteran
Join Date: Apr 2008
Location: Smiths Station, Al
Posts: 7,661
Likes: 0
Received 13 Likes
on
10 Posts
Year: 87
Model: Wagoneer
Engine: 4.0 I6
IAC = https://www.cherokeeforum.com/f9/acronyms-3599/
Look it up in our accronyms file. You may find many more that will be helpful to interpret the forum.
Look it up in our accronyms file. You may find many more that will be helpful to interpret the forum.
Last edited by BlueXJ; 11-01-2008 at 08:08 AM. Reason: rudeness.
#5
Newbie
Thread Starter
Join Date: Oct 2008
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
thank you that link is very useful ... Im going to check grounds on battery terminal and cpu today ... will a carb cleaning fuel additive help clean out the iac and should I use maybe an aresol carb spray ?
#6
Newbie
Thread Starter
Join Date: Oct 2008
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
so i checked and pushed on all the connection on and around the iac and throttle boddy and the problem went away for 2 days but started stalling and not starting unless I have the gas pedal pushed in tonight after work...im guessinf one of those connections or parts in going bad ...any thoughts ?
#7
Renix Super Guru
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 16 Likes
on
12 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Instead of just pushing on them try unplugging them and spray some contact cleaner (Radio Shack) on them before reassembly. The addition of the cleaner and the physical unplugging/reattachment combo will help to make a better contact surface for the signal that the different components have to send to the ECU.
Thread
Thread Starter
Forum
Replies
Last Post
beabout
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
14
07-06-2018 11:10 AM
australian_expat
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-02-2015 09:02 PM
Jicki Rough
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 09:36 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)