10ac

i have a 1998 jeep cherokee 4.0 4x4 jeep cherokee xj with the np231 tc. i need a wire harness thats the one that has the injector plugs on it. i need for it to be in working order. it has two of the plugs that connect to the pcm. please help if you can and id really appreciate it, and i mean that for sure. my jeep has been down for a month and i just had installed a new lift and new tires and wheels and put about 2 miles on it then an issue occured and im hoping its the harness. thanks y'all!!

Jeepin2004

is there anyway to get a pic of the harness you need for I could match it up to a harness I have on a 99 4.0L from xj

10ac

this is a pic i found where someone else was looking for one. as u see in the pic its the harness thats the white and black plug on the ecu. it goes to the fuel injectors and sensors and tranny and o2 sensors and so on. its pretty easy to remove.

Jeepin2004

Pretty sure I have it, get back to u in a bit

Jeepin2004

Is this it

10ac

thats it. only thing thats different is the injector plugs. but im thinking i can swap them. was the vehicle an automatic with the np231 transfer case? is there any damage that u see? how much are u looking to get shipped? thanks very much for trying to help me out. very much appreciated.

Jeepin2004

Pm sent

Flex This

O have a complete harness out of a 96 from the fuse box and all under hood harness

10ac

dunno if a 96 will work. i have another thread i started to make sure a 99 would work. ill ask about a 96. im not sure. im a noob to jeeps.

shivic

sounds like you need an complete engine harness.

im parting out a 98 4.0 a/t laredo

10ac

yes, basically what i need is whats seen in the pics above. white and black plug from pcm/ecu on to the injectors etc...

10ac

thanks yall for your help. purchased one hoping it would solve my problem. it didnt. o well...try something else.