I'm looking for a used/ cheap locker for my Dana 30 with 3.55 gearing and a used/cheap limited slip for my rear C 8.25(3.55 gears, I need to check spline)

I'm interested in all brands. I'd pay shipping if I found the right one. Please PM me!

 

I looked on Amazon a week ago & found a new one for the front for $225 shipped.The rear's are about $350.Give or take.

Stock spline count is 27 for the front & 27 or 29 for the rear.

Pretty much the early '96 & down 8.25's are 27 spline & the later '96 & up are 29.

Both lockers new will cost about $600.Don't forget gear oil & gaskets.I'd get Lube Lockers.I also did my axle bearing while it was apart.Cheap insurance.$40 for the bearings.

Side note:
While you have it all apart,you could do the disc brake conv., too.PM me if interested.

 

Thanks man, that helps a lot. I'm in High School and sports right now so I'm on a tight budget.

Hey if you could get me a link to that locker for 225 that'd be great. I couldn't find it.

 

I guess I'd also be interested in a rear locker. C 8.25, I need to check spline

 

What year?

 

98

 

29 Spline

 

Thanks

I'm mostly interested in a front locker

 

I'm loooking everywhere! someone please help me out!