I am located in West Chester, PA

I have a BBQ smoker that I built, and I lost the contract to the garage that I have been renting due to a falling out with family members, and I have no room to move the smoker, so I m forced to either sell it or trade it.

(It is NOT completed, just need paint coat)

Main cooking chamber is made from 120 gallon tank, and welded to it, is a 60 gallon tank as a firebox. There is a vent system but I didn't finish the linkage yet.
Entire smoker is mounted on a new 4x8 trailer. With 1/8 aluminum diamond tread plate as the floor.
The door is 52 inches wide, the main grate is 51x23 inches, enough to cook 20 racks of ribs at same time!
I have two 50-lb iron blocks that I planned to use as counterweights to open the door. (The door itself weigh a hundred pounds.)
I have a ton of hickory wood logs that I ll include.
All hinges are custom fabricated from 3/8 thick steel, none of that cheap Home Depot hinges here.
All hardware are stainless steel, (bolts, washers, and nuts) plus there's a lot of custom machined stainless steel parts on it too.

Basically this project needs a little of this and that here and there (odds and ends) plus a coat of paint.

I'm hoping to get like 750 bucks ( I already sank a thousand bucks on this project) or trade it for a cherokee.

If u are looking to flip this smoker for a profit, u can easily sell it for 2-3 grand when ur done.

Talk to me and see what's up. You can either PM me or text me at 610 701 1385, make sure you mention the BBQ smoker

 

Here's the pictures Firebox door 51x23 cooking grate Dual smoke stacks

 

Traded for a 01 cherokee. Mods can now close this thread