[WTB] downpipe w/o restriction
#1
Seasoned Member
Thread Starter
Join Date: Nov 2011
Location: Morgantown WV
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
downpipe w/o restriction
Looking for a down pipe with out the factory 30% restriction. Not sure if anyone has one laying around or not.
#3
Seasoned Member
Thread Starter
Join Date: Nov 2011
Location: Morgantown WV
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
good deal, I'm assuming they bolt up to the stock locations, or is there any mod/bends needed to be made? All the jys here around me have their own jeep yards and there's nothing but what's left of the bodies lol. I'll keep checking back with them though. What have you paid in the past so I dont feel like I'm being shafted and have a round about? I appreciate it Khyren.
#4
Member
Join Date: Jun 2012
Location: Gastonia, NC
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I usually pay $5 or so at the U pull yards with the flange. Cut it off about 2" after where the weld is to up size the pipe. I cut that weld off gingerly at home. Then cut the pipe on your car right at the weld. This way all you have to do is slide the new down pipe in the hole and make a small fillet type weld instead of a butt weld on something that thin. This makes a big difference for me because all I have is .035 wire on my mig machine.
Thread
Thread Starter
Forum
Replies
Last Post
98Redbird
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
01-30-2024 11:33 AM
4WD4EVER
Modified XJ Cherokee Tech
28
07-28-2023 07:12 PM
YourPalBigAL
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
11-09-2015 10:46 PM
Crimmy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-01-2015 06:43 PM
xjr10
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
09-19-2015 04:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)