4:10 gears and carrier
Thread Starter
CF Veteran
Joined: Apr 2011
Posts: 1,146
Likes: 0
From: Clayton, NC
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
4:10 gears and carrier
Looking for a 4:10 ring & pinion and appropriate carriers for a HP D30 and C8.25. Needs to be in decent shape, no cracks, chipped teeth, or major defects. Post some pictures so I may see. Thanks!
Edit: If you only have a set for one of these axles, a reply is welcome.
Edit: If you only have a set for one of these axles, a reply is welcome.
Thread Starter
CF Veteran
Joined: Apr 2011
Posts: 1,146
Likes: 0
From: Clayton, NC
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
What about the D30? I'm under the impression you have to change out the carrier for it.
Trending Topics
Thread Starter
CF Veteran
Joined: Apr 2011
Posts: 1,146
Likes: 0
From: Clayton, NC
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
Totally think I found a D30 and C8.25, 27 spline with 4.10 gears at my local junk yard. Hell yes!! Pulling them suckers in T-minus 10 hours.
Last edited by onlyinajeep726; Jan 30, 2012 at 08:39 PM.
Thread Starter
CF Veteran
Joined: Apr 2011
Posts: 1,146
Likes: 0
From: Clayton, NC
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
Verified with the Jeep dealer that those axles I found were in fact geared with 4.10's. Pulled them and got them for 50% off. I'd say, this has been the best Xmas so far!
Last edited by onlyinajeep726; Jan 30, 2012 at 08:39 PM.
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Thread Starter
CF Veteran
Joined: Apr 2011
Posts: 1,146
Likes: 0
From: Clayton, NC
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
Yep. It was a 2.5L, 4 cylinder with 5-speed manual. Jeep dealer ran the VIN for me and said it definitely had 4.10's. Went to the junk yard right away and began taking them out. W00T!
Last edited by onlyinajeep726; Jan 30, 2012 at 08:40 PM.
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
that fur sure with the 4 banger you got 410 that how i got my gear upgrade i bought a rear cover for the 8.25 with a screw in plug end that mess on yours what year did they come from
Senior Member
Joined: Apr 2009
Posts: 954
Likes: 2
From: New Waverly, Tx
Year: 1997
Model: Cherokee
Engine: Used engine just put in less than 79kmiles onit jeepersCreepers 60mm TB, '99-'01 intake, BorlaHeader
Originally Posted by onlyinajeep726
Verified with the Jeep dealer that those axles I found were in fact geared with 4:10's. Pulled them and got them for 50% off. I'd say, this has been the best Xmas so far!