Im selling my rocksliders.
upgrading to some 2x6x1/4, a bit sturdier and more permanent.

you can call or text 707 889 2374
or message me on here
im located in SANTA ROSA CA 95401

these sliders are constructed from 2" tubing 3/16 thick
used just over 30ft in tubing total. cost me just under 200$

They have also been professionally line-x'd, which also cost me just under 200$. I had the painter put 4 coatings on the bottom and 2 on the top, then texture all around. seeing as the top just sees shoes, and the bottom sees the rocks

along with the 350 spent i also put quite a few hours into it welding it up and bending the tubing at my shop.

so i think when im asking 300 im being fair.
i know that may seem a bit steep for what they are,
but when you include the cost of the line-x. its a lot more reasonable.

and that line-x deff does a good job of protecting it
ive slid these over rocks multiple times with nothing to show for it. the line-x has a 10,000lb tensile strength ( thats what the representative said at least )
and it was proven by mythbusters that line-x does in fact increase strength on almost anything it is painted on haha annnywayys.

I am completely willing to package and ship at your cost.
I called ups and got a few quotes just to give you an idea
Im in northern california 95401

To 90003 LA Ca 68. 06$
To 73301 Austin Tx 97. 38$
To 32114 Daytona beach Fl 101. 21$

or local pick up for free.
you can call or text 707 889 2374
or message me on here

How much would shipping be to 50158 area code? JW These are sweet sliders

50158. Marshalltown Iowa
shipping would be 100$ flat

Did you make these?

Yea

Looks pretty good man nice job

Keep getting messages asking if ill take 200 since you can get sliders for 200 elsewhere.
Well i apologize if you dont understand. But the line-x paint thats on there was nearly 200$
So that's why I can't sell so cheap..

When u buy 200$ sliders from places online they either come unpainted or powemder coated ( strong but deff not no 10,000 lb tensile strength )
Add the extra to buy mine and you won't ever have to worry about paint. Unless u dont want them black ( you can paint over line-x)

Would these work on an MJ? I just built a set for my XJ but the are made with 2X6 with rockers cut out of the way.

I would like to see if they would fit on my project MJ though. When you get a chance would you let me know and also the shipping to 33308 if they would fit.

Thanks

PM me if you'd be interested in making another set with out line-x.

as far as i know the frame underneath is the same.
so i dont see a reason why it wouldnt work.

shipping to for lauderdale fl would be just over 100$
id call it 100 flat.

Any pics on the XJ? And where do these bolt to? Do you have to drill new holes?

FYI they won't work for an MJ, good luck on the sale tho

Brandon

i mig welded them on but there is holes for 9 bolts on each slider 3 on each support beam, holes need to be drilled thru the frame for the bolts tho.


as far as pics this is all i have

price drop.

375 shipped anywhere in the us.

now if they only bolted to the pinch seem.