D35/8.25 Disc Brake Swap Parts
#1
Seasoned Member
Thread Starter
Join Date: Aug 2011
Location: Florida
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Comanche
Engine: 4.0
D35/8.25 Disc Brake Swap Parts
I've got the Caliper Bracket/Backing plates with E-brake assembly/pads, E-Brake Cables, Proportioning Valve, and Calipers with soft lines and pads from a ZJ Grand Cherokee. I will also include the 4 bolts that bolt the calipers to the brackets. All parts are used, in working order. I would recommend getting new pads. $200 shipped to lower 48, $180 picked up. Located in Groveland, Fl 34736. Thanks, Harley
(pic does not show proportioning valve or e-brake cables)
(pic does not show proportioning valve or e-brake cables)
Last edited by harleys; 04-21-2012 at 08:50 PM.
Trending Topics
#9
Junior Member
Join Date: Sep 2010
Location: jacksonville, Fl
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 6cyl
I've read this upgrade. But do you have to change the brake line on the rear axle, or will my extended break line be fine a d just switch in the zj lines?
#10
Seasoned Member
Thread Starter
Join Date: Aug 2011
Location: Florida
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Comanche
Engine: 4.0
The extended line is fine. However, you have to do something with the hard lines on the axle. Some people just bend them and re-route them, others cut and re-flange the hard line I believe. I haven't actually done the swap yet.
#12
Seasoned Member
Thread Starter
Join Date: Aug 2011
Location: Florida
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Comanche
Engine: 4.0
I found a Comanche local that I want to buy so I need a little extra money. I'll do one kit at $175 shipped for the next 24 hours. Hurry!!!