-91+ Chrysler 4.0L ECU for manual trans (50627356)...sold
-Tom Woods driveshaft for 4.0L with AW4 adn NP231 with around 8" lift (32" collapsed and 36.5" extended)...sold
-NP231 shifters and factory linkages, AX15 setup sold, still have the AW4
-brake/clutch and gas pedal assembly for the AX-15 sold

I'm now splitting up the black doors and Dana 35 rear.

Adding:

-Smokers vent windows for the front doors
-Front window glass (have both sides)
-Passenger rear window glass
-Innards from all the doors
-Dana 35 rear non c-clip axles, could use new studs (can install for the price of the studs)
-Dana 35 rear brake backing plates with brakes (could use new brakes but these stopped fine when removed)
-3.07 gears with carrier and non c-clip spiders

 

i need good hatch struts if you got em

also, any 30" wheel/tire packages in good shape?

 

I need to check around to see if I have a set of matching rims, that might take a day or two with the snow and all (still shoveling out where the parts are all at).

I do have a set of four 235/75R15 Cooper tires with a 215/75R15 Goodyear for a spare if you're interested, they're unmounted right now though.

 

let me know what you got and for how much...my current setup needs to be replaced b/c the tires are worn and rims are unbalanced/bent (slight shimmy at 55mph).

i'm not really looking to spend much...just want a decent (straight) setup till i can go bigger

 

Do you still have the overhead console? Does it work? any pictures? How much do you want? thank you... I am also in nj

 

I'm still looking for a fourth matching rim under all the snow, I should have two sets kicking around somewhere.

I'm looking for $200 for the tires alone since they have great tread left on them and considering the Coopers cost around $80 a piece at all the places around me not to mention the price of the Goodyear. Not sure if that's more than what you're looking to spend or not but those tires are all unmounted.

 

I do still have the console and will grab pictures of it later tonight. The fabric could stand a cleaning and getting glued back on and one of the doors has a little piece broken on it so it won't stay shut. It does include the brackets to mount it but does not include the temperature sensor (forgot to pull all that before the Jeep got junked). If you're still interested, give me an offer, I'm not looking for all that much for it.

 

As for the rest of the stuff, give me an offer if you're interested, want to move most of this stuff out since I'm looking at picking up two more Cherokees.

 

I dont need the whole thing the digital screen on mine burnt out.... i will make you an offer after i see a pic i want to be fair =) thank you

 

Just wondering if you have any outside mirrors for an 89 xj. Both mine are broken and need new ones. Manuals are fine or manual remote. No electric though. Thanks

 

Sorry, didn't see this till today. Unfortunately, I don't have any mirrors that aren't broken right now but I'll keep my eye out to see if any pop up.

 

No worries. Thanks

 

How much for a good starter motor shipped to 17701?

 

what kinda axles do have that you are willing to part with

 

I still need to check all the starters to make sure they work, they worked when removed from the Jeeps but haven't tested them since. They also changed the starters somewhere along the line but not sure when, would need to check into that also. All the starters I have are for the older 4.0's (removed from '90-'93's).

The only axle I have right now that isn't currently under a Jeep or in the plans of a project is that Dana 35 that I stripped apart and is for sale piece by piece. In the next few months, I'll have a Dana 30 in parts (Swapping a UCA mount to a different style so not sure if anyone would want the axle at that point) and Dana 35, both of which are still under my MJ but will be getting ripped out once I get the funds to finish these one tons.

I might be picking up another Jeep or two in the coming weeks, not sure on the axles yet.