Bolt on "A pillar style" fog light mount
#16
Senior Member
Join Date: Dec 2010
Location: Wekiva, FL
Posts: 888
Likes: 0
Received 2 Likes
on
2 Posts
Year: 99 sport
Model: Cherokee
Engine: 4.0 i6
I also like them very much.
From what I see they mount to the exterior behind the mirror using the same 3 bolts and holes that are used to mount the mirrors.
Great design I like it and would also be interested in a set.
I would love to see them with maybe a 5 or 4 inch light on them.
I want to see how much the light would come over the mirror. Like when you're driving and you look at the mirror how much up above the top edge of the mirror will the light come out.
From what I see they mount to the exterior behind the mirror using the same 3 bolts and holes that are used to mount the mirrors.
Great design I like it and would also be interested in a set.
I would love to see them with maybe a 5 or 4 inch light on them.
I want to see how much the light would come over the mirror. Like when you're driving and you look at the mirror how much up above the top edge of the mirror will the light come out.
#18
Seasoned Member
Thread Starter
Join Date: Jan 2011
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
I can do paypal
yes but as of this moment the sale is pending
unfortunately this is the only set. so once its gone there are no more.
yes but as of this moment the sale is pending
unfortunately this is the only set. so once its gone there are no more.
#19
Seasoned Member
Thread Starter
Join Date: Jan 2011
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
I also like them very much.
From what I see they mount to the exterior behind the mirror using the same 3 bolts and holes that are used to mount the mirrors.
Great design I like it and would also be interested in a set.
I would love to see them with maybe a 5 or 4 inch light on them.
I want to see how much the light would come over the mirror. Like when you're driving and you look at the mirror how much up above the top edge of the mirror will the light come out.
From what I see they mount to the exterior behind the mirror using the same 3 bolts and holes that are used to mount the mirrors.
Great design I like it and would also be interested in a set.
I would love to see them with maybe a 5 or 4 inch light on them.
I want to see how much the light would come over the mirror. Like when you're driving and you look at the mirror how much up above the top edge of the mirror will the light come out.
I was possibly thinking of making a cut from the big hole that the mirror wires run through to the first bend and feed the wired through the door following the harness. but I figure I would leave this decision up to the potential buyer since they may have a different idea on how they want to do it.
#21
Seasoned Member
Thread Starter
Join Date: Jan 2011
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Some more shots of what people asked for. Sorry but I only had time to do the driver side.
How the mount looks on the mirror
Pics with a 6" KC daylighter
The view from the driver seat.
How the mount looks on the mirror
Pics with a 6" KC daylighter
The view from the driver seat.
#23
CF Veteran
Join Date: Feb 2010
Location: Allentown, Pa
Posts: 3,869
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: 4.0L HO
Make another set and I'll give you $40 shipped. You said you needed money.... here's your chance. People will be all over these. The only reason I don't have a pillar lights is because I don't want to drill into my a pillar in case I don't like them.
#25
Seasoned Member
Thread Starter
Join Date: Jan 2011
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
I already have a templet made. Ill think about making more I could use the money. Just getting the bends right and having to take my door panels apart every time I need to do a test fit is a pain in the ***.
#27
CF Veteran
Join Date: Apr 2008
Location: Wisconsin
Posts: 3,569
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 HO
I like those a lot better then the ones that you need to drill holes in the a-pillar. Props on that. Just clean up the fab (holes and such) a little more and they would be great. If you decide not to sell them, make a separate thread describing it with pictures. Good job.
Can't believe they haven't sold at that price.
Can't believe they haven't sold at that price.
#30
Seasoned Member
Thread Starter
Join Date: Jan 2011
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Ok guys if your willing to pay $40 shipped for a set I will make more. Just I dont have the equipment at home so I have to do these during my lunch break at work so please be patient. If it really takes off I will invest in the tools/equipment to make them at home then I will have more time to devote to them. Please no advanced payments. I will take payment when a set is ready to ship. I know there was one thread here that the seller was never heard from again for what ever reason and I want to avoid any situation like that.
I will to go back in this thread to create a list so I have people in order.
This set was intended for myself and since that part wasnt going to be seen I didn't care what it looked like just as long as it worked. But Since I will be trying to sell a bunch of these I will do my best to make it look as clean as possible.
I will to go back in this thread to create a list so I have people in order.
I like those a lot better then the ones that you need to drill holes in the a-pillar. Props on that. Just clean up the fab (holes and such) a little more and they would be great. If you decide not to sell them, make a separate thread describing it with pictures. Good job.
Can't believe they haven't sold at that price.
Can't believe they haven't sold at that price.