Well I got a new car, and kind of want to change paths with the jeep now. I am hoping for as close to $6000 as I can get, but I'm not firm on that.

99 Cherokee Sport
4.0L Straight 6
209,xxx miles
Np231 T-Case
Dana 30 Front Axle
Dana 35 Rear Axle
Power Locks, Mirrors, And Windows
RC 6.5" X-Series Lift
RC Dual Steering Stabilizer
35x12.50R15 BFG All Terrains
15x8 Black Unique Wheels
Full Size Spare, Which Is A Maxxis Buckshot 35x12.50R15 On A Matching Rim
Trimmed Front Fenders, And Trimmed Bumper Caps
Smittybuilt Nerf Bars
Homemade Snorkel
Homemade Roof Rack
6 100W Offroad Lights
Thrush Muffler
Mossy Oak Camo Headliner
Sony 4-Way Speakers All Around
Modified Hinges For Easier Taking Of Doors Off
Will Come With a Set Of Half Doors
New Radiator Back In March
Oil Is Changed Every 3,000 Miles Or 3 Months
1,000 Miles Ago It Got a Full Tune Up...Plug, Wires, Cap, Rotor, Fluids, Etc
A/C Blows Cold And Heat Is Hot
Class 3 Trailer Hitch

Ok so I think I'm forgetting some stuff, but I can't remember. The only bad things about this jeep are the infamous sticky lifter, the front fenders aren't the prettiest, and the A/C compressor sometimes squeals when first turning the A/C on. I did do a build thread for it. So if you would like to know more about the jeep, or want to make me an offer you can ask here, pm me, email me at kmoney21@rocketmail.com or call/txt me at 512-492-5504.

I am located in Round Rock, TX btw.

https://www.cherokeeforum.com/f46/99...r-build-87115/

 

I've never had to put a price on an XJ so if my price seems high let me know. I'm just kinda throwing a number out there. Any input from y'all is appreciated.

 

sweet ride man! how did u modify your hinges to take the doors off? i wanna do it to my 1998 xj

 

Thanks man. It has alot of time and money into it haha. I ended up taking my doors off so I had room to work. Then I ground the top and bottom of the pin off. Next using a punch and a hammer I beat the pin out. Matched diameter to a bolt, which just slides out. Put half the hinge back on door, lifted it up, slide bolts in. My doors ended up needing both shims on the bottom hinge, and none on the top hinge to make it line up right. I was going to get some cannon plugs to rig up wiring and make that easier, but I put it up for sale. If within a month or two I still have it plans are to finish a few little things, then do a 4 link rear with full width axles, a comp cut, and then some. Within the next 7 months I'll move to a place with some land so then I could tear the jeep down and build it the way I dreamed it would be if I wanted too. That's if it doesn't sell though haha.

 

Where did you get the camo headliner material from? Nice Jeep.

 

yourautotrim.com and thanks bro