For sale ***This area has been closed. You can view posts but can not create new posts or reply to existing posts in here.***

98 XJ For Sale - Mostly Stock

 
Thread Tools
 
Search this Thread
 
Old Sep 8, 2011 | 01:50 PM
  #1  
maktub's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 37
Likes: 0
From: Watertown, MA
Year: 2005
Model: Grand Cherokee
Engine: 4.7L
Default 98 XJ For Sale - Mostly Stock

Hello,

Regretfully, it looks like I'm selling my 98 Cherokee Sport. I picked it up off a co-worker last December with 137000 on the odo. Since then, I've fallen in love with the Jeep. I’m selling it because I now need a reliable DD, and I don’t have the time to commit to it. Otherwise, I would definitely keep it…

The XJ developed a pulsing squeak in the left front wheel, so I threw in rotors and pads a few months ago. Now the squeak is back, so I'm thinking the groove in the steering knuckle is making the inner pad stick. The buyer would need to weld it (I can provide a link to a write-up) or replace the knuckle. She's almost always starts on the second crank instead of the first. Low pressure at the rail, so I think there's a checkvalve problem at the fuel pump (An inline valve is a gamble that I didn’t want to take). The exhaust manifold has a crack. I noticed it the last time I seafoamed. Also, the tail pipe is loose from the muffler. I have a new clamp, just haven’t put it together. The CEL is on with O2 codes. I'll throw in a new upstream O2 if that helps me sell it. I didn't want to replace the O2 before the manifold for obvious reasons. A/C doesn't work (last on my list). 142500 on the odo now. No leaks. Regular 3k oil changes (2 since buy). She actually runs great. She just needs a bit of attention. PO was an adult that babied the Jeep (just didn’t do too much work). It's originally from Arizona, so it's seen about 5 years of NE weather.

PO work:
- Cap
- Rotor
- Wires

Work by my mechanic:
- CPS
- Other sensor/relay (don’t rem which)

Work by me (all within last three months):
- Raybestos rotors in front
- Wagner ThermoQuiet pads in front
- Champion Copper Plus plugs
- 703 injectors (courtesy of Programbo)
- Duralast water pump
- Duralast thermostat
- Upper and lower radiator hoses
- Dayco accessory belt


The private party KBB at the mid-level is $2925. Not sure how to price it. I'm asking for $2300 obo.

Jeep is in Watertown, MA. Mostly stock 1998 Cherokee Sport, 4L, red, auto trans. Power windows and doors (no remote, but has factory remote system). It has an aftermarket single CD stereo (sounds good: MP3/CD/FM/AM…). Spare in back.
Attached Thumbnails 98 XJ For Sale - Mostly Stock-08202011098.jpg   98 XJ For Sale - Mostly Stock-08202011100.jpg   98 XJ For Sale - Mostly Stock-08202011101.jpg   98 XJ For Sale - Mostly Stock-08202011099.jpg  

Last edited by maktub; Sep 9, 2011 at 10:32 PM. Reason: Price change
Old Sep 9, 2011 | 09:42 AM
  #2  
maktub's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 37
Likes: 0
From: Watertown, MA
Year: 2005
Model: Grand Cherokee
Engine: 4.7L
Default

No one? Make an offer, you never know...
Old Sep 9, 2011 | 10:31 PM
  #3  
maktub's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 37
Likes: 0
From: Watertown, MA
Year: 2005
Model: Grand Cherokee
Engine: 4.7L
Default

Price now $2300 obo. Feel free to suggest otherwise.
Old Sep 12, 2011 | 05:40 PM
  #4  
maktub's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 37
Likes: 0
From: Watertown, MA
Year: 2005
Model: Grand Cherokee
Engine: 4.7L
Default

Is the price high? I don't get it. I drive her once a week now to keep things moving. I drove her daily all winter with zero problems. I think this XJ would make a great project for somebody. If I had the time (and space), I would do it myself, but I'm picking up a WK to be the DD.

BTW, this is a 4x4 with a 231.

Last edited by maktub; Sep 12, 2011 at 06:11 PM.
Old Sep 12, 2011 | 05:59 PM
  #5  
maktub's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 37
Likes: 0
From: Watertown, MA
Year: 2005
Model: Grand Cherokee
Engine: 4.7L
Default

$2150 obo
Old Sep 12, 2011 | 06:50 PM
  #6  
btm24's Avatar
Senior Member
 
Joined: Nov 2010
Posts: 943
Likes: 0
From: zephyrhills fl
Year: 1989
Model: Cherokee
Engine: 4.0 I6
Default

It might help if you paint some stuff like the flares and bumpers just a flat black. Looks help alot that's what people are looking for. Good luck on the sale

Brandon

And I don't like to say stuff about people's prices sorry
Old Sep 12, 2011 | 07:04 PM
  #7  
maktub's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 37
Likes: 0
From: Watertown, MA
Year: 2005
Model: Grand Cherokee
Engine: 4.7L
Default

Originally Posted by btm24
It might help if you paint some stuff like the flares and bumpers just a flat black. Looks help alot that's what people are looking for. Good luck on the sale

Brandon

And I don't like to say stuff about people's prices sorry
Thanks for the tip! I understand about prices...

Thanks again.
Old Sep 15, 2011 | 02:31 AM
  #8  
restoring's Avatar
Seasoned Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2011
Posts: 459
Likes: 10
From: Near Memphis, TN
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Might want to add a few interior shots, and at least 2 good under carriage shots - People worry about rust on northern cars (I grew up in Jersey and we worried about it there a lot!)

My Jeep club installed a lift on a members Jeep that was bought out of MI - it was hell getting all the rusted part loose - a lot of snapping and replacing, cutting and welding.

If the under carriage looks good and the interior is ok, those shots should help you move it.

GLWTS
Old Sep 16, 2011 | 10:25 AM
  #9  
maktub's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 37
Likes: 0
From: Watertown, MA
Year: 2005
Model: Grand Cherokee
Engine: 4.7L
Default

Originally Posted by restoring
Might want to add a few interior shots, and at least 2 good under carriage shots - People worry about rust on northern cars (I grew up in Jersey and we worried about it there a lot!)

My Jeep club installed a lift on a members Jeep that was bought out of MI - it was hell getting all the rusted part loose - a lot of snapping and replacing, cutting and welding.

If the under carriage looks good and the interior is ok, those shots should help you move it.

GLWTS
Indeed. Thank you. Will do.
Old Nov 5, 2011 | 09:00 AM
  #10  
maktub's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 37
Likes: 0
From: Watertown, MA
Year: 2005
Model: Grand Cherokee
Engine: 4.7L
Default Traded In

So I started gathering interior and underbody shots, and linked the tailpipe to the muffler, in preparation for selling this Jeep. I was busy for a while with other stuff and didn't really have a chance to update this thread. Then, I realized that I need a truck for the winter, and went shopping. Long story short, I ended up trading the XJ in for pennies on a WK sale. Not ideal, but I'm a happy WK owner now.

The reason for this post: Thank you CherokeeForum, and members. The XJ and I wouldn't have made it this far without you. The information here is invaluable. Best of luck to everyone!
Old Nov 5, 2011 | 09:26 AM
  #11  
The Rooster's Avatar
CF Veteran
 
Joined: Feb 2011
Posts: 3,074
Likes: 0
From: Bergen County, New Jersey U.S.A.
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
Default

do you want to sell just the snowboard racks that are on it?
Old Nov 5, 2011 | 09:56 AM
  #12  
Paintballa0788's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 1,497
Likes: 0
From: Atlanta
Year: 90
Model: Cherokee
Engine: 4.0
Default

Originally Posted by The Rooster
do you want to sell just the snowboard racks that are on it?
He traded the Jeep off bud.
Read the last post on p1
Old Nov 7, 2011 | 12:24 PM
  #13  
maktub's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 37
Likes: 0
From: Watertown, MA
Year: 2005
Model: Grand Cherokee
Engine: 4.7L
Default

Originally Posted by The Rooster
do you want to sell just the snowboard racks that are on it?
Sorry. They were on the XJ when I traded it. Would you believe that I forgot to take them off? haha
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Redwolf624
Modified XJ Cherokee Tech
8
Apr 16, 2021 11:38 AM
aglass0fmilk
Cherokee Chat
11
Oct 27, 2020 08:05 AM
SpunksterXJ
Engines/Tranny/T-Case
0
Sep 13, 2015 09:31 AM
RickJames Bish
Wanted
1
Sep 2, 2015 07:40 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:11 PM.