For sale ***This area has been closed. You can view posts but can not create new posts or reply to existing posts in here.***

92 XJ

 
Thread Tools
 
Search this Thread
 
Old Apr 23, 2011 | 09:58 PM
  #1  
XJeeper's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 99
Likes: 0
From: Clarksville, TN
Year: 1992
Model: Cherokee
Engine: 4.0
Default 92 XJ

Links to my original threads:
my-xj-t22.html
http://www.itsajeep.org/vBulletin/showt ... hp?t=16344
http://www.itsajeep.org/vBulletin/showt ... hp?t=18405

OK guys we got info on the HOA and rules are rediculas, I hate these things, and one of the rules is no unliscensed Vehicles. SO basicly this XJ has to go. I am leaving this open to 3 options.
1. Buy it right out as is where is with a clear title $2500
2. I will take a decent utility ATV 4wd even trade.
3. I will give both the above a couple days and I give up and will go part out route.

If it goes to the part out route I have till the 15th of May to get rid of everything, and I am not going to pull the parts, if you want something you come pull it. take it home, and I take money, NO CHECKS for anything, I am already screwed out of $125 from a jeeper I thought I trusted but thats another story.

ANyway here is a pretty good build list, if interested in any of the parts PM me or email FSJRZDVL@YAHOO.COM and I will give you my price. I am not interested in shipping anything larger than a flat rate large box.

Its a 1992 Jeep Cherokee XJ.
The rear axle is a Dana 44 out of an 89 XJ, it is geared to 4.56 and has Alloy USA axle shafts.
The front is a factory Dana 30 also geared to 4.56 and locked with a lockright locker. The tie rod is rusty's HD, Both front and rear axles are protected by SOLID industries diff covers.
Under the hood is the factory original 4.0 which doen't even have 80,000 miles yet. On the hood is a pair of Custom aluminum hood vents and a pair of "Custom" steel hood vents (floor vents)
front bumper is a Rusty's Baja Tube bumper with a SMittyBilt XRC-8000 mounted to it rear bumper is an older daystar tube bumper with modified factory mounts to add strenth and a few different hooks and rings to go into the receiver for recovery
To protect the rig from rocks that bite I have a pair of AJ's offroad rock sliders.
This whole mess sits on a rusty's 6.5" Long Arm Suspension, and what would be 35's but oneof those are blown.
Things I missed
Floor is custom BedLined
CB included
radio is a pretty nice MP3 player type
I have 2 New Redtop Optima Batteriesf
I have all 4 new ball joints
I have about 4 spare Ujoints
spare axle shafts for front
Spare front DS from an 88 XJ
spare thermostat
spare complete seats
spare pair of front 4" coil springs
misc spare front body parts

IF YOU BUY WHOLE
For recovery equipment it has a XRC 8000 winch, warn winch kit bag with pulley, chain, drings, gloves, a tree strap or two, a couple recovery straps, whatever bags, and boxes I have with equipment in them. Now this would all be dependent on price.

Now know bads or issues with the jeep
the Dana 44 bearings are shot and the ring gear is missing 3-4 teeth, operates fine but I would keep an eye on it
The drag link is bent, I can supply a good factory one with the jeep if you want
the tires are retreads so finding a replacment is probably not possible and one is cut so it needs tires
This was a trail rig so the body is pretty beat up
Old Apr 24, 2011 | 12:32 AM
  #2  
The Rooster's Avatar
CF Veteran
 
Joined: Feb 2011
Posts: 3,074
Likes: 0
From: Bergen County, New Jersey U.S.A.
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
Default

why not just put plates on it??
Old Apr 24, 2011 | 07:58 AM
  #3  
XJeeper's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 99
Likes: 0
From: Clarksville, TN
Year: 1992
Model: Cherokee
Engine: 4.0
Default

Could but still have to deal with place to leave it, I have a lack of storage, and I still need to do the repairs. Basicly I am just losing interest
Old Apr 24, 2011 | 09:10 AM
  #4  
The Rooster's Avatar
CF Veteran
 
Joined: Feb 2011
Posts: 3,074
Likes: 0
From: Bergen County, New Jersey U.S.A.
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
Default

well if you part then i am interested in a few small thins pm when you are rdy sorry to see it good... looks well built
Old Apr 24, 2011 | 09:20 AM
  #5  
XJeeper's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 99
Likes: 0
From: Clarksville, TN
Year: 1992
Model: Cherokee
Engine: 4.0
Default

Originally Posted by The Rooster
well if you part then i am interested in a few small thins pm when you are rdy sorry to see it good... looks well built
PM me with what parts your interested in I'll give you prices.
Old Apr 24, 2011 | 09:25 AM
  #6  
Cloud9-XJ's Avatar
Seasoned Member
 
Joined: Feb 2011
Posts: 451
Likes: 0
From: Smokey Mountains
Year: 1996
Model: Cherokee
Engine: 2.5L
Default

GLWS
Old Apr 24, 2011 | 09:52 AM
  #7  
XJeeper's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 99
Likes: 0
From: Clarksville, TN
Year: 1992
Model: Cherokee
Engine: 4.0
Default

What is GLWS?
Old Apr 24, 2011 | 09:52 AM
  #8  
XJeeper's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 99
Likes: 0
From: Clarksville, TN
Year: 1992
Model: Cherokee
Engine: 4.0
Default

Heres a list of what I am thinking on major components:
frnt axle 400
rear axle D44 Alloy USA Shafts solid diff cover 4.56 gears (gears bad, bearings need replacing) 300
motor 250
tranny 200
tcase 150
frnt bumper 250
rear bumper 200
sliders 150
rock lights/offroad lights 50
2 x cbs 30 each
suspension 1000
wheels tires 50 each chrome steel wheel 35" retread
2 x front XJ drive shafts 1 from 88 manuel one from 92 auto 50 each
seats 2 sets 100 per set
genright hood vents installed on hood 35
other floor vent hood vents FREE
hood with both sets of vents installed 75
an extra pair of front springs, rough country 4" 100
factory spring isolaters 10
new optima red top 100
4 new in the box ball joints 40
spare drive shaft ujoints 10 ea
spare TStat 180 I think 10 (free with motor)
misc parts I may have missed just PM me and either make an offer or I will set a price.

NOT LISTED I have 2 winches and a bunch of recovery gear but thats not for sale HOWEVER buy whole and the winch on the jeep goes with it PLUS I will let go come select recovey gear

note the above list is still contigiant on waiting a couple days to see if it sells whole and I really want the major components spoken for before I start teardown.
right now the only thing spoken for is front axle
I have interest in the complete suspension but no commitment
Old Apr 26, 2011 | 12:51 PM
  #9  
InvaderTrax's Avatar
Member
 
Joined: Mar 2011
Posts: 138
Likes: 0
From: Knoxville, TN
Year: 1993
Model: Cherokee
Engine: 4.0
Default

This is exactly what I'm looking for and in my price range. Would it survive the 150 mile drive back to my house?
*emailed as well*

Last edited by InvaderTrax; Apr 26, 2011 at 12:55 PM.
Old Apr 26, 2011 | 05:02 PM
  #10  
XJeeper's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 99
Likes: 0
From: Clarksville, TN
Year: 1992
Model: Cherokee
Engine: 4.0
Default

Originally Posted by InvaderTrax
This is exactly what I'm looking for and in my price range. Would it survive the 150 mile drive back to my house?
*emailed as well*
I sent you an email back. It would take a little bit to go 150 miles, if you read all of above it requires steering, the drag link is trashed, and tires, well at least one 35" tire. After a jump start I would say it would do ok may be a slower trip as this was a trail rig for me so it has no sway bars and may be a little squirlly.

I emailed you my number. Call me and we can talk about it.
Old Apr 27, 2011 | 08:14 PM
  #11  
XJeeper's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 99
Likes: 0
From: Clarksville, TN
Year: 1992
Model: Cherokee
Engine: 4.0
Default

OK had something lined up for this but it fell thru. COme on I really wanna sell whole before I go into parting. $2500 for a slew of spare parts and a jeep that needs minimul work to go. Heck I can even supply a factory drag link with it if desired. and for the full $2500 it will include the winch on the jeep some of my recovery gear, Couple of ammo cans for spare parts or tools, 2 sets of seats, a 1/2 sheet of diamond plate aluminum for whatever you want to use it for, bumpers, rock sliders, an Optima red top, the battery in the jeep, well you have seen the list!!!
Old Apr 27, 2011 | 08:34 PM
  #12  
XJeeper's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 99
Likes: 0
From: Clarksville, TN
Year: 1992
Model: Cherokee
Engine: 4.0
Default

I just listed this on Craigslist Clarksville so I expect a ton of junk to come in and maybe just maybe a sale
Old Apr 28, 2011 | 07:57 PM
  #13  
XJeeper's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 99
Likes: 0
From: Clarksville, TN
Year: 1992
Model: Cherokee
Engine: 4.0
Default

OK guys I am dropping the price to $2250 for all except the winch and recovery equipment. I really wanna see this thing gone before the 13th of MAy
Old May 1, 2011 | 12:32 PM
  #14  
XJeeper's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 99
Likes: 0
From: Clarksville, TN
Year: 1992
Model: Cherokee
Engine: 4.0
Default

OK all I really want this jeep sold!
$2200 buyer takes all to include winch and some select recovery gear. Basicly what I don't keep for my truck and durango is the buyers. I know I am taking a huge hit on this but I also know its difficult to sell a damaged vehicle
Old May 3, 2011 | 02:02 PM
  #15  
XJeeper's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2010
Posts: 99
Likes: 0
From: Clarksville, TN
Year: 1992
Model: Cherokee
Engine: 4.0
Default

OK all I really want this jeep sold! last price drop. If it doesn't sell by the 12th I will get it to my buddies house where it can sit and rot.
$2000 buyer takes all to include winch and some select recovery gear. Basicly what I don't keep for my truck and durango is the buyers. I know I am taking a huge hit on this but I also know its difficult to sell a damaged vehicle



All times are GMT -5. The time now is 05:57 AM.