Selling my current project, priced high because I realy dont know if i want to get rid of it but money talks so make offers. Can get pics in next few days. Most parts anre new with zero miles

Body:
1996 cherokee classic
99 header panal.
tubed from seats back with 1.75x.120
unibody plated with 3/16
front inner fenders stretched to header panal
front stinger bumper all .25 and 1.88 tube
2x6 rockers lifted 4inches and boat sided to the frame
.25 aluminium boatsides and flat belly
custom flat belly xmember
shaved controll arm mounts
front tow hooks and sleaved inner frame

Suspension:
Double triangulated link front
-7.5 Rubicon express coils
-1.5x.25 dom upper links with 3/4x3/4 Ruff stuff heims from hell
-2x.25 dom lower links with 7/8x3/4 rudd stuff heims from hell.
Double triangulate 4 link rear
-17 bilstein 9100 rock crawler remote resivore coil over.
-1.5x.25 dom upper links with 3/4x3/4 Ruff stuff heims from hell
2x.25dom lower links with 7/8x3/4 ruff stuff heims from hell

Axles
Front 78/79 hp 60
-3/8 upper link truss
-upgraded 80's brakes
-superior comp cut chromoly inners
-35 spline foote outers
-35spline warn premium lockouts
-ballistic coil brackets
-all 1/4 brackets
-1.75x.188 dom ram hoop filled with .25 plate
-ram mount ties into coil bucks and truss
-psc double ended 2x8 cylinder
-whole axle has been media blasted primed and painted
Rear axle 80s ford hp 60 housing
- short side has ben lengthend by Rocksolid Performance
-78/79 cs and knuckles
-yukon king pin rebuild
-3/8ths truss
-2x8 se psc ram
-parts mike springless rear high steer arms
-1.5x.25dom tie rd with generic 3/4x3/4 heims
Drivetrain
4.0l with about 170k
-99 intake
-banks header
-flowmaster 40
-psc ct pump with pulley
-psc resovoer
-oba
-port,polished, and shaved engine pro head
-airtex inline fuel pump
-16 drop sump poly fuel cell
-dual rear batterys
-2yr old radiator
-power steering cooler
Aw4
-RAdesigns rt shifter(not made yet, I was testing for rory with old set up)
-new pump seal
231/300
flipped np 231 with 6 planatry upgrade
-D&D doubler kit
Flipped Short style dana 300
- twin stick with cable shifters
-clocked flat
- plugged and flipped vent tube
Interior
-stock dash
-heater replaced with stainless switch panal
-heater on toggle
-push button start
-99 console
- no carpet
-jcw suspension seats
-rjw 4pt. harnesses
-console has frt% rear suck down,rear steer, and linelock controlls,
-fuel pump cut off
Recovery
-champion 10k front winch
-new smittybuilt xrc8
-mile marker front 1.5k suckdown
-2 drings on front bumper
-1 dring insde stinger gusset
Other
-lift gate hydrolic rear steer controlls
-dual rear batterys
-many extras and spares
-alluminum body panals
-rock lights
Needs
-gears(have front install)
-tube ran over front of body
-dana 300 rebuilt
-driveshafts
-rear axle shafts
-front u-joints
-seats mounted
-orbital and front steering plumbed
-floor patched(some rust but had to cut for front links and tcases)
springs for coilovers
-exhuast

Trailer
-22.5'x90"
-dual breaking axles
_4lug trailer bolt pattern
-new pressure treated 2x6 deck
-new lights and wiring
-whole frame wire-wheeled,primed, and painted,
-needs fenders
-Could tires soon
I know there is much I am forgetting so pm me if your serious and I can get it all lined out and more accurate.

$10500

 

location per CF rules, & pics would def help. this thing sounds beastly.

 

location is same as in mini stats,Hamilton MI, I will try to get pics up in the next couple days

 

bump

 

forgot to mention hydro has been plumbed and also have 4 nib 17in black soft 8s and a 15in spare rim