1996 Cherokee FS
Thread Starter
CF Veteran
Joined: Mar 2008
Posts: 5,902
Likes: 19
From: Kalkaska, Michigan
Year: 2001
Model: Cherokee
Engine: 4.0L
Need to sell.. $6500 OBO or part cash part trade for 4 popper TJ
1996 Jeep Cherokee 2 Door Base Model
5.5" of lift
IronRock Offroad 5/8" Hemi Joint Steering (Very Beefy)
Rusty's Double Shear Track Bar
Sway Bar Disconnects
Home built Long Arm front Suspension
Rustys Belly Skid
Factory Steel Gas Tank Skid
Front Factory Skid (Not installed)
Advanced Adapters SYE
Novak Cable Shifter kit (Very sold T-case shifts)
Uni-Body plated with 3/16th 3x3 angle Iron from front of leaf springs to where stock lowers would be
Custom built 2x4x3/16th wall rock sliders welded into the stiffeners
Custom built rear bumper with tire swing out, High Lift mount and CB anntena mount
Custom built front bumper with Winch mount, grill hoop and 1/2" plated steering box brace
Door Hinges have been modded to be able to remove
No Carpet allteh floor is bedlined for easy cleaning
After Market Oriely's front Seats
Center councel upgraded to Gen II XJ for Cup holders
front axle is a LPD30 with 4.10 gears and a Spartan locker
Rear axle is a Ford 8.8 open with 4.10 gears and disc Brakes
X5- 32x11.5-15 Goodyear MTR Kevlar's with less than 1000 miles on them
X5- 15x8 Soft 8 wheels
Running dual electri fans
Cold air cone air filter
1996 Jeep Cherokee 2 Door Base Model
5.5" of lift
IronRock Offroad 5/8" Hemi Joint Steering (Very Beefy)
Rusty's Double Shear Track Bar
Sway Bar Disconnects
Home built Long Arm front Suspension
Rustys Belly Skid
Factory Steel Gas Tank Skid
Front Factory Skid (Not installed)
Advanced Adapters SYE
Novak Cable Shifter kit (Very sold T-case shifts)
Uni-Body plated with 3/16th 3x3 angle Iron from front of leaf springs to where stock lowers would be
Custom built 2x4x3/16th wall rock sliders welded into the stiffeners
Custom built rear bumper with tire swing out, High Lift mount and CB anntena mount
Custom built front bumper with Winch mount, grill hoop and 1/2" plated steering box brace
Door Hinges have been modded to be able to remove
No Carpet allteh floor is bedlined for easy cleaning
After Market Oriely's front Seats
Center councel upgraded to Gen II XJ for Cup holders
front axle is a LPD30 with 4.10 gears and a Spartan locker
Rear axle is a Ford 8.8 open with 4.10 gears and disc Brakes
X5- 32x11.5-15 Goodyear MTR Kevlar's with less than 1000 miles on them
X5- 15x8 Soft 8 wheels
Running dual electri fans
Cold air cone air filter
Thread
Thread Starter
Forum
Replies
Last Post
OldTires
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Aug 28, 2015 08:06 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



