A~Pillar Light Brackets (XJ)
Thread Starter
Cherokee Forum Vendor
Joined: Feb 2010
Posts: 737
Likes: 2
From: Black Diamond Foothills, KY.
Year: Multi
Model: Cherokee
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
I love mine man... However I did not use the hardware... Was to much of a pita to drill all the way through and then the bolts nut wouldnt have sat level... I went with a self tapping stainless bolt head screw... Plenty strong... Also recommend two small orings... If u use them between the bracket and a-pillar it seals off all the water... No mess... Although still think I gotta use RTV for the wire hole unless I can come up with a very small grommet which I doubt... Just a suggestion... Would save on hardware at less then $3 for it all and half the time to install...
Thread Starter
Cherokee Forum Vendor
Joined: Feb 2010
Posts: 737
Likes: 2
From: Black Diamond Foothills, KY.
Year: Multi
Model: Cherokee
I love mine man... However I did not use the hardware... Was to much of a pita to drill all the way through and then the bolts nut wouldnt have sat level... I went with a self tapping stainless bolt head screw... Plenty strong... Also recommend two small orings... If u use them between the bracket and a-pillar it seals off all the water... No mess... Although still think I gotta use RTV for the wire hole unless I can come up with a very small grommet which I doubt... Just a suggestion... Would save on hardware at less then $3 for it all and half the time to install...
Sounds like an option, thanks for sharing!
Thread Starter
Cherokee Forum Vendor
Joined: Feb 2010
Posts: 737
Likes: 2
From: Black Diamond Foothills, KY.
Year: Multi
Model: Cherokee
Newbie
Joined: Mar 2012
Posts: 10
Likes: 0
From: lafayette
Year: 1994
Model: Grand Cherokee
Engine: 5.2
What to buy,brakes or a set of zj mounts. I would get this, but then i woukd need lights, and woukd only have 3 wheek vrakes, so, brakes then these. Looks good.
Thread Starter
Cherokee Forum Vendor
Joined: Feb 2010
Posts: 737
Likes: 2
From: Black Diamond Foothills, KY.
Year: Multi
Model: Cherokee
Thread Starter
Cherokee Forum Vendor
Joined: Feb 2010
Posts: 737
Likes: 2
From: Black Diamond Foothills, KY.
Year: Multi
Model: Cherokee
I hear ya......this is what I'll shoot for.........
Next week is flat out booked, no extra time to fixture........
The following week, I'll need to take a few days off then get back in the shop, I'll be restricted to 'light duty'....during that period, I 'will' finish up the fixtures for the 'snorkle' version and fab up some ZJ brackets (I made a minor change with the ZJ's light mount area)......
So if things go well, we'll be looking at the 1st week of June or there abouts to put this to bed.
Thanks all for your continued intrest, standard XJ brackets are in stock and ready to rock for anyone looking.
Next week is flat out booked, no extra time to fixture........
The following week, I'll need to take a few days off then get back in the shop, I'll be restricted to 'light duty'....during that period, I 'will' finish up the fixtures for the 'snorkle' version and fab up some ZJ brackets (I made a minor change with the ZJ's light mount area)......
So if things go well, we'll be looking at the 1st week of June or there abouts to put this to bed.
Thanks all for your continued intrest, standard XJ brackets are in stock and ready to rock for anyone looking.






