LOW PROFILE Shackle Relocation Kits
CF Veteran
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Feb 2011
Posts: 2,450
Likes: 2
From: Dubuque IA,Libertyville IL
Year: 1992
Model: Cherokee
Engine: 4.0 HO
ill be doing a write up some time in mid march since im in Iowa till then for school, so i will have some flex tests and ease of install. along with the ride quality. right now my ride sucks because of my poor shackle angle and the 3 hour drive from chicago area to iowa kills me and rides like a dump truck, this trip should really show how much it smooths out the ride. cant wait to get them installed.
CF Veteran
Joined: Mar 2012
Posts: 1,785
Likes: 0
From: Holland MI
Year: 2000
Model: Cherokee
Engine: 4.0
My write up will be on my build most likely, this way we all don't post a write up detailing the whole thing here. Might just do one small one here.(bullet points)
Senior Member
Joined: Dec 2011
Posts: 922
Likes: 1
From: Centralia, Wa
Year: 1997
Model: Cherokee
Engine: 4.0
You'll have another guaranteed purchase right here *** soon as I see a write up and pictures. I'm just days away from pulling the trigger on "other" relocation brackets but I would REALLY like to try these as I don't want to go any higher.
Member
Joined: Aug 2011
Posts: 113
Likes: 0
From: Mesa, AZ
Year: 1993
Model: Cherokee
Engine: 4.0 liter High Output
Just installed my RC relocation kit today and it just isn't working for me I have tried a shorter shackle and ever hole location on that thing and no combination will give me the same height I had before. Which is clearly what everyone is looking for. So I'm going to see about what I can do for a return if that doesn't work I'm going to make some mods to these shackles. If I'm still stuck or just sick of trying I'm going with your kit. If I already saw some write ups and knew that they worked good I would have bought them by now. So please everyone who is getting them put them on do a write up and then go out and test them really hard so we know!!!!!!!
Just installed my RC relocation kit today and it just isn't working for me I have tried a shorter shackle and ever hole location on that thing and no combination will give me the same height I had before. Which is clearly what everyone is looking for. So I'm going to see about what I can do for a return if that doesn't work I'm going to make some mods to these shackles. If I'm still stuck or just sick of trying I'm going with your kit. If I already saw some write ups and knew that they worked good I would have bought them by now. So please everyone who is getting them put them on do a write up and then go out and test them really hard so we know!!!!!!!
CF Veteran
Joined: Mar 2012
Posts: 1,785
Likes: 0
From: Holland MI
Year: 2000
Model: Cherokee
Engine: 4.0
Don't worry, i am as anxious to do a write up as you are to read it.
Ill be going into as much detail as possible.
I have a before rti score (i know it's not a trail or rock) but it gives me a before and after measurement.
I've been logging plenty of seat time to know the ride change.
If all goes well, soon.
Ill be going into as much detail as possible.
I have a before rti score (i know it's not a trail or rock) but it gives me a before and after measurement.
I've been logging plenty of seat time to know the ride change.
If all goes well, soon.
Member
Joined: Aug 2011
Posts: 113
Likes: 0
From: Mesa, AZ
Year: 1993
Model: Cherokee
Engine: 4.0 liter High Output
Get out of town. I realize it says they will. That's why I tried shackles that were 1 3/4" shorter than what I had. But they ended up hitting on the shackle relocation bracket. Which is why I said I could try cutting to make it right or I can just screw the whole thing, eat the cost and get these. If I had known about these before ordering RCs kit and knew they had already been field tested I most certainly would have bought them. That was my point. But thanks for pointing that out :/
Last edited by Richieb9; Feb 1, 2013 at 09:18 AM. Reason: mispelling


