The CavFab Over the Axle (OTA) Track Bar System
Thread Starter
Sponsor
Joined: Apr 2016
Posts: 342
Likes: 6
From: Rising Fawn, Georgia
The CavFab Over the Axle (OTA) Track Bar System
This has been something that we have had a LOT of questions about..and we are happy to announce it is now available for purchase on our website!
>High Strength DOM (.188 wall)
>Double Adjustable
>Currie Enterprises Johnny Joints on BOTH ends
>CNC Precision Laser Cut Axle Bracket
>Designed to work with the Rubicon Express 1665 Frame Bracket
>Engineered to allow steering to be ran either Over or Under the knuckle. 2 mounting locations on the axle side bracket allows you to dial in your steering geometry.
>NO BS WARRANTY, you break it...we replace it!
>Works on 3" Lift and up
Our OTA track bar system relocates your Jeeps track bar to the top of the axle. This allows for more parallel steering geometry in both UTK (under the knuckle) and OTK (over the knuckle) applications. Our OTA Track bar system offers 2 mounting orientations for the track bar on the axle side...this allows you to run your steering under or over the knuckle while still maintaining near perfect geometry between the track bar and drag link. This OTA track bar setup can be purchased on its own, or along with our CrossOver Steering system where you will save a few dollars on the whole package. Our OTA track bar setup will work with other brands of HD steering, however we have engineered this to work most ideally with our CrossOver setup.
http://cavfab.com/CavFab-Jeep-XJ-Ove...-OTA-Track-Ba…
The CavFab Over the Axle Track Bar System:
>High Strength DOM (.188 wall)
>Double Adjustable
>Currie Enterprises Johnny Joints on BOTH ends
>CNC Precision Laser Cut Axle Bracket
>Designed to work with the Rubicon Express 1665 Frame Bracket
>Engineered to allow steering to be ran either Over or Under the knuckle. 2 mounting locations on the axle side bracket allows you to dial in your steering geometry.
>NO BS WARRANTY, you break it...we replace it!
>Works on 3" Lift and up
Our OTA track bar system relocates your Jeeps track bar to the top of the axle. This allows for more parallel steering geometry in both UTK (under the knuckle) and OTK (over the knuckle) applications. Our OTA Track bar system offers 2 mounting orientations for the track bar on the axle side...this allows you to run your steering under or over the knuckle while still maintaining near perfect geometry between the track bar and drag link. This OTA track bar setup can be purchased on its own, or along with our CrossOver Steering system where you will save a few dollars on the whole package. Our OTA track bar setup will work with other brands of HD steering, however we have engineered this to work most ideally with our CrossOver setup.
http://cavfab.com/CavFab-Jeep-XJ-Ove...-OTA-Track-Ba…
Senior Member
Joined: Oct 2011
Posts: 731
Likes: 0
From: St. Albert
Year: 1989
Model: Cherokee
Engine: 4.0L I6
I'd be interested in seeing a CAD of the effect that the track bar being so short has on the steering arc/articulation geometry. Looks really high quality as always, and I understand why it has to be so short for your kit, but I'm definitely curious to hear some testimonials!