Alloy Shafts (Dana 30) from AlloyUSA
#1
CF Veteran
Thread Starter
Alloy Shafts (Dana 30) from AlloyUSA
At some point you're going to get tired of replacing broken OEM shafts.
Upgrade to alloy shafts from AlloyUSA before you're "that guy".......again.
Dana 30 Kit....<---<< clicky!
Upgrade to alloy shafts from AlloyUSA before you're "that guy".......again.
Dana 30 Kit....<---<< clicky!
Alloy USA -- Alloy Front Axle Kit For Jeep Wrangler (TJ) 97-06, Cherokee (XJ) 92-01, Dana 30 27-Spline Kit
High tensile strength 4340 Chromoly is heat-treated, tempered and induction hardened to produce these heavy-duty axles that are up to 40% stronger than stock 1040 axles. Each axle shaft is backed by Alloy USA’s™ exclusive ten-year warranty! We use the latest splining technology to produce splines that are stronger than traditional cut splines. The shafts are then precision CNC machined and magnaflux inspected for cracks before receiving a slick black anodized finish.
High tensile strength 4340 Chromoly is heat-treated, tempered and induction hardened to produce these heavy-duty axles that are up to 40% stronger than stock 1040 axles. Each axle shaft is backed by Alloy USA’s™ exclusive ten-year warranty! We use the latest splining technology to produce splines that are stronger than traditional cut splines. The shafts are then precision CNC machined and magnaflux inspected for cracks before receiving a slick black anodized finish.
#2
CF Veteran
Thread Starter
Trending Topics
#11
CF Veteran
Join Date: Oct 2009
Location: Fauquier County, Virginia
Posts: 2,867
Likes: 0
Received 15 Likes
on
13 Posts
Year: 1991
Model: Cherokee
Engine: I-6 4.0 HO
Frank,
I tried looking on your website, but I'm probably an idiot and over looked them if you have them. Do you sell Alloy shafts for the Chrysler 8.25? Thanks!
I tried looking on your website, but I'm probably an idiot and over looked them if you have them. Do you sell Alloy shafts for the Chrysler 8.25? Thanks!
#12
CF Veteran
Join Date: Jun 2010
Location: Ohio
Posts: 2,117
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 stock
27 spline C 8.25 (1991-1996)
http://www.seriousoffroadproducts.co...ducts_id=77872
29 spline C 8.25 (1997-2001)
http://www.seriousoffroadproducts.co...ducts_id=75580
#14
CF Veteran
Join Date: Oct 2009
Location: Fauquier County, Virginia
Posts: 2,867
Likes: 0
Received 15 Likes
on
13 Posts
Year: 1991
Model: Cherokee
Engine: I-6 4.0 HO
Sorry I'm not Frank but...
27 spline C 8.25 (1991-1996)
http://www.seriousoffroadproducts.co...ducts_id=77872
29 spline C 8.25 (1997-2001)
http://www.seriousoffroadproducts.co...ducts_id=75580
27 spline C 8.25 (1991-1996)
http://www.seriousoffroadproducts.co...ducts_id=77872
29 spline C 8.25 (1997-2001)
http://www.seriousoffroadproducts.co...ducts_id=75580
#15
CF Veteran
Join Date: Oct 2009
Location: Fauquier County, Virginia
Posts: 2,867
Likes: 0
Received 15 Likes
on
13 Posts
Year: 1991
Model: Cherokee
Engine: I-6 4.0 HO
Frank, one quick question. If I order the Dana 30 kit with the disco eliminator ('91 XJ), is there anything else I need to install to keep drivability on the streets? I've heard mixed results, some saying the swap goes fine, no issues or changes in drivabilty, and others say that there are issues and other parts must be added. Thanks!