front axel
#1
Newbie
Thread Starter
Join Date: Mar 2010
Location: salem SC
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0
front axel
im new to all this just bought a 93 grand cherokee limted for 300 bucks i thought all was good till i went to put the front drive shaft back in the yoke spins free with the wheels on the ground i know this is not good any ideas
#5
Junior Member
Join Date: Mar 2010
Location: lakemary
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 6cyl
haha id be worrying about the four wheel drive first. but rought country makes good cheap kits. or you could piece one together.
#7
CF Veteran
to get about 3.5 to 4 inches the cheap way is to do a front to back swap. then just get a set of 4.5 front coils and shocks. then you can atleast fit a set of 31's.
it's harder to fit 33's on a grand, it will take a lot of trimming and more lift than an xj.
with a tj, you only need 2 inch spacers to fit 33's.
it's harder to fit 33's on a grand, it will take a lot of trimming and more lift than an xj.
with a tj, you only need 2 inch spacers to fit 33's.
Thread
Thread Starter
Forum
Replies
Last Post
studmuffin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-03-2015 06:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)