Project: Chopsaw
10-05-2015, 09:03 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2015
Location: Florida
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L HO
Project: Chopsaw
Well my XJ is completely apart and torn down( Im about two weeks late in this post)! i have temporarily dubbed it chop saw! As you all can see my rod bearings are down to brass and my skirts have rubbing. Some of my water passages in my head were clogged and my transfer case chain fell off when i was resealing it! but the project will continue. I know my engine rebuild will be slow but hopefully my body and interior restoration should move smoothly. The block is going be bored .20 over and i plan on getting most of my engine parts from titan, sorry the second photo looks like it was taken during the civil war.
10-05-2015, 09:08 PM
#2
Junior Member
Thread Starter
Join Date: Jul 2015
Location: Florida
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L HO
i got my driver side frame somewhat cleaned up so i can tell how bad the rust is. There is alot of chips in the frame tube, The frame still feels solid but its going to be welded in the splits and im going to get frame stiffeners. Thoughts on the level of frame rust?
Thread
Thread Starter
Forum
Replies
Last Post
1995REDXJSPORT
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
10-06-2015 08:27 PM
Austin Moore
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
10-04-2015 02:27 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)