Need np242J & a friend in AZ!
Thread Starter
Junior Member
Joined: Jan 2013
Posts: 48
Likes: 2
From: Phoenix / AZ
Year: 1998
Model: Cherokee
Engine: 4.0L I6 PTE
Hey jeep fans
Struggling AZ XJ fan here with a bad transfer case...
Looking for a 242 J 23spline (I have 98 XJ Limited 4x4 4.0)
I got both shafts out, tranny leaning but can't get all the bolts off the Tcase to boot!
Any extra working Tcase's laying around and perhaps a hand to help, I will pay!
Struggling AZ XJ fan here with a bad transfer case...
Looking for a 242 J 23spline (I have 98 XJ Limited 4x4 4.0)
I got both shafts out, tranny leaning but can't get all the bolts off the Tcase to boot!
Any extra working Tcase's laying around and perhaps a hand to help, I will pay!
Last edited by BluJay; Jan 23, 2018 at 03:02 PM.
CF Veteran


Joined: Nov 2017
Posts: 2,478
Likes: 275
From: Southern Texas (former AZ & Aus)
Year: 1999
Model: Cherokee(XJ)
Engine: I6 4.0L
I'd always be willing to lend a fellow Jeeper a hand.... however, I'm up in the North end of the state. Hopefully you'll get what you need.
Poke around in some of the threads....and searching might find it.... I recently read a few posts in a thread on here where someone had mentioned a really good Jeep parts salvage yard in the Phoenix area. That might get you the t-case you need as well.
Poke around in some of the threads....and searching might find it.... I recently read a few posts in a thread on here where someone had mentioned a really good Jeep parts salvage yard in the Phoenix area. That might get you the t-case you need as well.
Man I missed this! Thanks for bumping it Rocket! Unfortunately Rocket and I both are quite aways from you down there, I'd give you a hand if I was local there. I'll keep my eyes open for someone who might be closer!
Thread
Thread Starter
Forum
Replies
Last Post
McHank
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Dec 7, 2011 12:55 PM
89Pioneer
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Nov 21, 2009 08:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



