Anybody now if local parts store's like Advance, Oreillys, or AutoZone carry the clamps to hold the leafs together. Any part # will work they all can cross reference it to something they have.

I'm getting ready to install sum AAL's, I already got 2- New Centering Pins, and 4 - New U-bolts, now I just gotta find sum clamps to put it all back together. I'd use the factory one but the AAl package I got has a short leaf and a long leaf. Any help would be appreciated, I dnt wanna order off the internet and wait 3-5 days or pay a outrageous bill for a $5 part overnight.

 

I assume you do not have a 4wheel drive shop in your area?that is where I would go if you do,I have seen them at Kragens,which is Oreillys now

 

We have a few shops but I need to take em the bolt, local place called 4-Wheels Unlimited that does nothing but 4X4 trucks/lifts has no idea what I'm talking about nor do the parts stores.

I'm hoping to get a part # I can take to em and have sumone cross reference it. I had to go onine to Advance and get the part number for the centering pin before my local Advacne could find it

 

I just went to 4wheelparts and typed in springs and on the third page they list center pins and spring clips,this is what you are looking for. pn# EXP98-300B

 

Anything homemade that could be used like from lowes or home depot maybe?

 

Honestly they are not a big deal,get some flat bar maybe an inch wide,cut it to lenght measure leafs and make a ushape out of it,drill two holes just above the springs and bolt them together. Or try to find a square ubolt the same width.

 

Sumthing like a square muffler clamp then?

 

Anything that will keep them together,you can look at the ones that are made just for this,there is not much to them.

 

found it superior makes em and advance, autozone, & oreillys carry e, 13-1401a

thanks a lot abovetimberline

 

autozone has them but they kill your flex, i run them