gully369

I would like a set if u have any left...been meaning to head back to the jy to find some but haven't found the time...can't wait to see the improvement even though the computer will even it out a bit after it gets use to them there should still be improvments in throtle response and milage (slightly less flow than the stock 24lb but better fuel atomization) for anyone else who is looking at this swap...all my research says this a worthy improvement

Programbo

Hello. Yes I happen to have a few sets and was just about to post another ad specifically for the 703 injectors. Just a quick update since my original posting: I now sell these 2 ways. For $60 (Shipped) I will test them electronically to insure they are not shorted and to test their mechanical function. I will clean the surface dirt completely and clean the tips out with injector cleaner. For $80 (Shipped) I will do all that but I will also disassemble them, soak them overnight in straight injector cleaner, blast them out with starting fluid and finally replace the micro-screens with new ones. I have not found an inexpensive source for bulk o-rings so do not replace those but I will replace any o-rings that look flat and/or torn or cracked with better ones.

gully369

Thanks for the quick response and shipping...I can't wait to get these babbies installed

jeepman156

I am very interested. Could you pm me? I'm not good with computers and couldn't figure out how

Mr.E

Pm'ed and excited

Joxer

I have a 98 XJ. Would these work for me? I see that they are much thinner than the factory injectors.

Programbo

Hello. Yes they are a direct swap for your '98 injectors with no mods needed. The body is thinner than the stock XJ injector but they are the same length and have the same size at the tip where they insert into the manifold and are the same thickness at the top where they seat into the fuel rail.

wildbill1

I believe the '99 uses the 784 injector.

j-rod

I got a set of #784 for 99-01 XJ.

I need #703 for my 96. Interested in a trade?

Programbo

If it was the other way around I would. The 784's are so plentiful I usually walk past 2-3 sets each time I go to the junkyard without messing with them. if I was you I would just grab 6 of the 99-01 XJ injector plugs and splice/solder them in and run the 784's in your '96.

j-rod

i have 5 of them from the neons...but dont really want to cut into the factory harness.

TheVision

do you have any left?

jeepxjtrails

Was wondering if these will fit on a 1990 I6 if not what is a good swap

Programbo

Hello and Happy New Year to all! Yes I have a few sets of the 703 and 784 injectors ready to ship. They (703's) will fit the '90 XJ as well. Send me a PM with any questions. Thanks.

Axel1831

Hey do you have any more? I pm'd you with questions already but I thought id ask here if you have any more.