What did you do to your Cherokee today?
Member
Joined: Jul 2010
Posts: 236
Likes: 0
From: Fort Worth, Texas
Year: 1998
Model: Cherokee
Engine: 242/4.0 I6
Installed an Accel tune-up kit. Plugs, wires, cap, & rotor. Old plugs looked great. No sign of any issues.
Bought a front bumper too. Now I get to wait while it's built and then shipped.
Bought a front bumper too. Now I get to wait while it's built and then shipped.
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Originally Posted by LanShark
I added another 1.5" with coil spacers and rear shackles to the 3" lift i already had and also Rino line my OEM fender flares. Tire are 31x10.50x15
Senior Member
Joined: Jan 2011
Posts: 702
Likes: 0
From: TX
Year: 2001
Model: Cherokee
Engine: 4.0
I primered them grey then painted them banner red all krylon. I plan on taking them off and having them and the front bumper powder coated.
Yeah I thought about that after I welded it up. I put the driver side strait back.
Yeah the long arms are 2"X2"X.250" they should hold up.
Yeah the long arms are 2"X2"X.250" they should hold up.
Newbie
Joined: Feb 2011
Posts: 24
Likes: 0
From: el paso TX
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by Kenne21
Pulled my old headliner out, scraped it clean. Then installed my new mossy oak camo headliner material. Reinstalled it.
Member
Joined: Jan 2011
Posts: 107
Likes: 0
From: So. Calif.
Year: 1990
Model: Cherokee
Engine: 4.0 IL6
How was it? I need to do mine. Was it messy under the headliner? What did you use to scrape it with?
Last edited by XJ_Libertad; Feb 21, 2011 at 10:35 PM.
Seasoned Member
Joined: Jul 2010
Posts: 400
Likes: 1
From: East Freetown MA
Year: 2000
Model: Cherokee
Engine: 4.0
Got it back from my old man who has had it since september. Wheeled it. Found out the drivers front hub bearing is shot, all three windsheald wipers are toast. The blinkers don't work. Its four thousand miles over due for an oil change. And the inspection sticker has run out. Oh and it has more road salt caked on it than I thought possible. Thanks for taking care of my rig dad.
Seasoned Member
Joined: Jan 2011
Posts: 349
Likes: 0
From: Round Rock, TX
Year: 1999
Model: Cherokee
Engine: 4.0L
Yes it was messy, but It actually came off fairly easy. I used a 2" wide paint scraper, and was careful not to stab into the board. It was really easy to do. I actually used the headliner material with the foam backing and used a headliner adhesive from Home Depot. I think it was by loc-tight or however its spelt. i have pics, but they won't attach. i have some in my photo album though.
Newbie
Joined: Feb 2011
Posts: 24
Likes: 0
From: el paso TX
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by Kenne21
Ok I got them to attach now haha.
<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=38641"/>
<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=38642"/>
<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=38643"/>
<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=38644"/>
<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=38641"/>
<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=38642"/>
<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=38643"/>
<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=38644"/>
Newbie
Joined: Mar 2010
Posts: 27
Likes: 0
From: Maryland
Year: 2000
Model: Cherokee
Engine: 4.0