Reverse Lights not working, where to start?
it seriously took like 30 minutes max. It was super easy to get it off, took a few minutes to clip the zipties. I took my time, opened, cleaned, brushed and sanded the contact points lightly. I put new dielectric grease in, reassembled, and reinstalled. Worked like a charm.
Member
Joined: Aug 2009
Posts: 164
Likes: 0
From: Shenandoah Valley, VA
Year: 1997
Model: Cherokee
Engine: 4.0L
My reverse lights are out as well. They were sorta working the other night but I had to play with the shifter a bit. When you clean this sensor in what manner are you cleaning it? Taking it apart and cleaning contacts?
Whoops, didn't see the second page. Sounds easy enough!
Whoops, didn't see the second page. Sounds easy enough!
Im new to the site so sorrry if i post incorrectly ; so here goes >
i have a 94 2WD Jeep 4.0 L6 and just noticed my backup/reverse lights dont work either and i wanted to know what kind of neutral safety switch i need to replace and where it would be located ?
i have a 94 2WD Jeep 4.0 L6 and just noticed my backup/reverse lights dont work either and i wanted to know what kind of neutral safety switch i need to replace and where it would be located ?
Senior Member
Joined: Aug 2009
Posts: 958
Likes: 0
From: Effingham, N.H.
Year: 1989
Model: Cherokee
Engine: 4.0 I6
Renix Super Guru
Joined: Mar 2008
Posts: 24,653
Likes: 19
From: In yourz postez fissin jurr spelinzs
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Report: I cleaned the TRS (Transmission Range Sensor for ya'll who already forgot what it means) and that fixed our issue.
Also, I did check with Advance Auto, and you're right, they call it the NSS too. That's really weird since the FSM calls it the TRS and there's a separate switch for the Park/Neutral position.
Also, I did check with Advance Auto, and you're right, they call it the NSS too. That's really weird since the FSM calls it the TRS and there's a separate switch for the Park/Neutral position.
try this site out
http://www.jeepin.com/features/nss/index.asp
http://www.jeepin.com/features/nss/index.asp
thanx for the links
but i wanted to know if theres anything different you might have to do with the neutral safety switch cleaning/replacement since my jeeps a 2-wheel drive automatic trans and not 4 wheel ??
but i wanted to know if theres anything different you might have to do with the neutral safety switch cleaning/replacement since my jeeps a 2-wheel drive automatic trans and not 4 wheel ??
Newbie
Joined: Apr 2011
Posts: 15
Likes: 0
From: Winterville NC
Year: 2001
Model: Cherokee
Engine: 4.0L
Thread
Thread Starter
Forum
Replies
Last Post
Aryl
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
May 5, 2024 10:29 PM
BayArea93xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Jun 11, 2016 10:43 AM
Ashs1714
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Sep 4, 2015 10:14 PM
rusty_bucket
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Aug 29, 2015 06:42 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)







