workin on gettin the np231 in tomorrow, then measure the rear shaft length & get it modded, so i am outta commission until like wednesday (if everything goes smoothly)

 

33x12.5x15 Firestone Destination A/T's

And if anyone's interested I've got a set of four 30x9.50x15 BFG A/T KO's for sale or for trade. PM ME IF ANYONE'S INTERESTED.

Let's do it. Someone set a date up!!

If wouldn't be an XJ if everything went smoothly :/ lol

 

lol, so true, it's always something that you don't even think of!

 

Either that or when you finish up a mod or a repair and get the tires back on and lower it back down only to realize you forgot to do something like 10 steps back.

Oh and my favorite, when you add a mod and then take it for a test drive only to realize that you now need something else done for it to function correctly :face palm:

 

Well I'm more than happy to set up a date.. Most likely im sure weekends work best for everyone? We need to get a location that's close for everyone to meet up at... I live downtown but have lived here for a week so don't know much around haha


So if anyone can chime in on a location let me know

 

I'm thinking 529 @ hw6 which is about 15-20 miles from me but that should be good for everyone north of i10 since that's where the majority is

 

so DailyDriven, you are totally right. i had the t-case mounted everything ready to go, & i get ready to drill & tap the shaft......finally found out one of the reasons they have you do a hack & tap instead of just the tap.....that hardened steel shaft is a PITA to get through. so now i have a seal flange kit on order from iro so i can hack & tap it. should be here this week. so i won't be able to drive it until next week i'm sure (or the weekend at the earliest) shoulda known, lol

 

southwest houston here ya'll....project and daily driver. just put in a tranny oil cooler from a ford explorer, fog lamps, rebuilt transfercase..sold tranny on craigslist, mismatch wheels and tires. more to come.

 

get you a build thread so we can see

 

I need help I was taking my door off yesterday on the passenger side and the hinge was upside down so when I cut it off the pin was on the part I cut off I need a top door hinge idc what shape it's in I just need it

 

i heard you could use grade 8 bolts, i forget what size. that's why people take the doors off before they cut em, and pop out that pin to flip it (i think)

 

Just use bolts. Thats what I did and they work great

 

I live in Montgomery and although I wouldn't mind meeting up where ever my suggestion would be to meet at County Line on Lake Conroe on a Friday night. They have live bands during the summer and then do some night wheeling at General Sams. Or something like that, get the best of both worlds....hanging out and wheeling. My two cents

 

Down

 

I already took them off but I cut the pin off on the wrong side