Cup holders - water bottle support
A bit ago i posted a question on cup holders and andrew gave me an idea i thought i would try. I happen to have some left over material from the threathholds i installed and the day off so i started measuring and cutting to make this support so that the water bottles wont be rolling around while on the trail. If i am having this issue i figure others are as well so i thought i would post my mid day project in hopes it might help someone else.
i used a vise and a mallet to bend the edges and a jig saw to cut the circles after drilling an access hole. I used a cardboard template to define the areas to cut out. After several fit checks and once i was happy with it i sanded the sharp edges down and used silicone to hold it in place. At some point i might paint it flat black depending on how much glare it gives off. https://cimg5.ibsrv.net/gimg/www.che...ae31651cc9.jpgInstalled pic. https://cimg8.ibsrv.net/gimg/www.che...43a4fd910f.jpgDue to the glare the photo looks a bit dark https://cimg5.ibsrv.net/gimg/www.che...eb1e75e042.jpgI am in the process of bending the second lip https://cimg5.ibsrv.net/gimg/www.che...8264a98c49.jpgAbout to drill a hole so the jig can start the cut. I set the cardboard template next to it. |
How does it work for you ?
|
thanks for the question Andrew, I have only used it on road so far and it seems to be working as intended. I had a long glass water bottle that normally "lays" in the holder over the hand brake but this time it stayed upright and out of the way. I have not tried it on the trail yet but I would expect the same results. the jury is still out on painting it or not.
another thing I noticed is since the bottom of the holders have two different sizes it can also be a bit unstable, at least for the glass bottle I had last night. I am currently debating picking up a set of those "jeep" cup holder inserts from ebay and installing those (makes a great excuse to match the floor mats). the good - it will make an even bottom, the bad - it will decrease the depth of the cup holders. |
Been doing some off roading in the tahoe area this week and through all the bouncing around the cup holder has worked like a champ. I had a couple of tall metal water bottles and it jept them in place the whole time.
|
All times are GMT -5. The time now is 04:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands