Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Aftermarket electrical systems (https://www.cherokeeforum.com/f89/)
-   -   Turn Signal Issue (https://www.cherokeeforum.com/f89/turn-signal-issue-248121/)

Collinmurphy 11-17-2018 05:09 PM

Turn Signal Issue
 
So when all my lights are off and key is on the blinkers work great. When I turn my lights on the dash has two solid green arrows. All the lights function as they should except for my front left blinker (driver side). I installed LED lights all around, blinkers, head lights, break lights, reverse lights. They all work just fine except for my front left. I installed a new flasher switch for LEDs and nothing. I checked the fuses and they are good. if I wiggle the turn single handle down slightly I will get the front left blinker to go off and come back on but will not constantly blink.

Is this a multi-function switch issue or an ohm resistor issue possibly, same fix for hyper flash?

DJXJ97 03-04-2019 10:47 AM


Originally Posted by Collinmurphy (Post 3526412)
So when all my lights are off and key is on the blinkers work great. When I turn my lights on the dash has two solid green arrows. All the lights function as they should except for my front left blinker (driver side). I installed LED lights all around, blinkers, head lights, break lights, reverse lights. They all work just fine except for my front left. I installed a new flasher switch for LEDs and nothing. I checked the fuses and they are good. if I wiggle the turn single handle down slightly I will get the front left blinker to go off and come back on but will not constantly blink.

Is this a multi-function switch issue or an ohm resistor issue possibly, same fix for hyper flash?

You probably need relays or resistors specifically for using leds.

Ralph77 03-04-2019 01:30 PM


Originally Posted by Collinmurphy (Post 3526412)
So when all my lights are off and key is on the blinkers work great. When I turn my lights on the dash has two solid green arrows. All the lights function as they should except for my front left blinker (driver side). I installed LED lights all around, blinkers, head lights, break lights, reverse lights. They all work just fine except for my front left. I installed a new flasher switch for LEDs and nothing. I checked the fuses and they are good. if I wiggle the turn single handle down slightly I will get the front left blinker to go off and come back on but will not constantly blink.

Is this a multi-function switch issue or an ohm resistor issue possibly, same fix for hyper flash?

I am thinking that your side markers are not working/blinking all the time. Maybe this will help you out.

https://www.cherokeeforum.com/f67/le...000-xj-246749/


All times are GMT -5. The time now is 02:30 PM.


© 2024 MH Sub I, LLC dba Internet Brands