Assistance wiring in roof basket lights
So today, I am going to wire in the lights on my roof basket. IT may be overkill but it is mainly for camping, and where we live, we do a lot of winter night wheeling in Grizzly Bear country.
Anyways, I have 3 sets of lights on the roof. Fronts= 116 W total Rears= 36 W total Floods= 108 W total I also have this kit for my switch. It is a touch screen LED panel. It has a 10A output. https://cimg8.ibsrv.net/gimg/www.che...b4766bea5b.jpg Can I run my power wires straight to this panel or should I be wiring in another relay? |
Relays!
The 36 watt can be done without a relay, but it will be a cleaner installation if you do them all the same. (I'm assuming you are going to switch them as three separate banks of lights; front, middle, and rear) Also, if you ever upgrade the middle bank, you are already wired for it. http://www.the12volt.com/ |
My math had me at 9.7A, 3A, and 9A which all would have cleared the built in 10A relays.
Did I miss something? |
Originally Posted by Mark Treleaven
(Post 3415414)
My math had me at 9.7A, 3A, and 9A which all would have cleared the built in 10A relays.
Did I miss something? |
Originally Posted by peligro113
(Post 3415418)
You are correct but the 9.7A and the 9A are too close to 10A for my comfort. A couple of $2 relays would save the box from frying, so why take a chance.
And then there's future-proofing to think about. |
All times are GMT -5. The time now is 08:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands