OBD Fusion App
#1
Junior Member
Thread Starter
OBD Fusion App
After downloading the Fusion app and plugging in the OBD II Forseal scan tool, The Check Engine Light came on; throttle position sensor low voltage. The TPS is about 2 months old and was purchased from Napa. Since there was no CEL before I plugged in the scanner I'm wondering if it somehow caused the TPS to fail, or did it find a fault that hadn't fully developed yet?
Anyone have experience with OBD II scanners causing problems?
Thanks!
Anyone have experience with OBD II scanners causing problems?
Thanks!
#2
CF Veteran
Join Date: Oct 2013
Location: Tarpon Springs, FL / Denver, CO
Posts: 2,097
Likes: 0
Received 8 Likes
on
7 Posts
Year: '98
Engine: 4.0 I6
I have never had an OBD2 sensor cause an issue
The aftermarket TPS units are generally not taht good. I have gone through 3 BWD sensors in the last 5 years after my stock on died.
Lifetime warranty, ftw
The aftermarket TPS units are generally not taht good. I have gone through 3 BWD sensors in the last 5 years after my stock on died.
Lifetime warranty, ftw
Thread
Thread Starter
Forum
Replies
Last Post
Fiskdog
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-20-2015 12:26 PM
XJD4PEH
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
11-22-2011 04:15 PM
Wrecked
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
04-08-2009 07:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)