What floorpans for my 92 MJ?
#1
Junior Member
Thread Starter
Join Date: Nov 2013
Location: St Pete Florida
Posts: 37
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Comanche
Engine: 4 liter
What floorpans for my 92 MJ?
90 MJ short bed. Factory bucket seats, 5 speed 4 liter 4x4. Lots of lift.
I knew it needed some patches when I bought it, (It was so cheap it didn't look past knowing it was worth double what I paid) and was gonna take them from a 90 Cherokee I have, but today I pulled back the carpet, and theres no floor from the tunnel drop off to the rocker!
I don't want to deal with drilling out all the spot welds and taking the pans from the Cherokee, because its pans aren't perfect, they have some bad spots as well.
The floor even rotted away from whatever you want to call the unit body frame section. The factory carpet sure was sturdy! The unit body frame is fine and solid.
Please tell me what brand and where to get them. I have searched and keep getting conflicting opinions about xj pans fitting perfect or not fitting at all. Yes I have a plasma cutter, mig and have replaced pans on several cars. I want a original look, plan to bedline the interior, and don't wanting them looking rigged from below either.
I knew it needed some patches when I bought it, (It was so cheap it didn't look past knowing it was worth double what I paid) and was gonna take them from a 90 Cherokee I have, but today I pulled back the carpet, and theres no floor from the tunnel drop off to the rocker!
I don't want to deal with drilling out all the spot welds and taking the pans from the Cherokee, because its pans aren't perfect, they have some bad spots as well.
The floor even rotted away from whatever you want to call the unit body frame section. The factory carpet sure was sturdy! The unit body frame is fine and solid.
Please tell me what brand and where to get them. I have searched and keep getting conflicting opinions about xj pans fitting perfect or not fitting at all. Yes I have a plasma cutter, mig and have replaced pans on several cars. I want a original look, plan to bedline the interior, and don't wanting them looking rigged from below either.
Last edited by 89 comanche; 04-21-2016 at 03:33 PM.
#3
aka Wade-O
Join Date: Dec 2008
Location: IN
Posts: 3,703
Likes: 0
Received 10 Likes
on
9 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0
XJ floor pans do not fit. trust me, i learned the hard way. i found a company on ebay for my floor pans. fit wasnt great but they were close enough to make work. this was 8 years ago and i dont remember the name of the company.
Thread
Thread Starter
Forum
Replies
Last Post
Toecutter
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
17
04-18-2016 02:29 AM
brielly1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
03-30-2016 09:46 PM
mattyice
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
03-27-2016 09:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)