The tale of SuperMJ
05-24-2018, 11:32 AM
#422
CF Veteran
Thread Starter
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 39 Likes
on
35 Posts
Year: 1999
Engine: 4.0
Last Sunday. I drove over to a barn about 60 miles away to pick up the last remaining tools I had in storage.
After leaving the barn, about 10 miles later, the MJ sneezed and blew holes through the oil pan and through the side of the block, rendering the truck loaded and useless.
Had my buddy come over and tow me home. Thanks BEN!
It's not a priority to fix it because I wanted to do 5spd/4wd swap at same time. So the ZJ gotta have to happen first.
After leaving the barn, about 10 miles later, the MJ sneezed and blew holes through the oil pan and through the side of the block, rendering the truck loaded and useless.
Had my buddy come over and tow me home. Thanks BEN!
It's not a priority to fix it because I wanted to do 5spd/4wd swap at same time. So the ZJ gotta have to happen first.
05-24-2018, 12:42 PM
#423
CF Veteran
Join Date: Apr 2008
Location: Burlington, NC
Posts: 2,340
Likes: 0
Received 8 Likes
on
8 Posts
Year: 1994...mostly...
Model: Cherokee (XJ)
Engine: 4.0L I6 HO, Lot's of Bolt Ons
Last Sunday. I drove over to a barn about 60 miles away to pick up the last remaining tools I had in storage.
After leaving the barn, about 10 miles later, the MJ sneezed and blew holes through the oil pan and through the side of the block, rendering the truck loaded and useless.
Had my buddy come over and tow me home. Thanks BEN!
It's not a priority to fix it because I wanted to do 5spd/4wd swap at same time. So the ZJ gotta have to happen first.
After leaving the barn, about 10 miles later, the MJ sneezed and blew holes through the oil pan and through the side of the block, rendering the truck loaded and useless.
Had my buddy come over and tow me home. Thanks BEN!
It's not a priority to fix it because I wanted to do 5spd/4wd swap at same time. So the ZJ gotta have to happen first.
05-24-2018, 12:47 PM
#424
CF Veteran
Thread Starter
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 39 Likes
on
35 Posts
Year: 1999
Engine: 4.0
Originally Posted by Desertfox1023
Dang, was it overloaded? I thought you went through that motor when you put the truck together?
I still don't know why it happened. It was the original motor that grenaded itself. I still have the other motor sitting on the floor waiting to go in the truck.
07-21-2018, 09:03 PM
#433
CF Veteran
Thread Starter
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 39 Likes
on
35 Posts
Year: 1999
Engine: 4.0
Took the wiring harness off while labeling each connection. Also labeled the vacuum stuff.
Took both manifolds off...
Originally thought theres just one hole on the side but now with the manifolds out of the way, I can see that there's two holes.
In addition to the holes in the oil pan. It LOOKS like cylinders #1, 2, and 3 are dead.
When I put the intake manifold upside down, the oil started pouring out of the cylinder #6 runner.
The air filter was so soaked with oil, it literally came dripping outta the filter. It's crazy.
I also took the battery cables out & sold them. I ll just make new set when I drop the new motor in.
A guy on NAXJA was selling bunch of stuff and he had a set of MJ bastard packs that he built like 10 years ago along with 1/4" wall driveshaft in perfect length I needed. So I had him deliver them to my house.
No problem. I ll just take the leaves apart and hit with a wire wheel & give them a coat of paint. What kind y'all recommend. Tractor paint or something?
I also bought a set of LWB sliders from a member on comancheclub. (krustyballer). Had to shoot a coat of primer on it immediately when I got home cause it was raining and I had to bring the sliders home on the top of the jeep. Didn't want it to start rusting bad.
That's it so far, I think.
Took both manifolds off...
Originally thought theres just one hole on the side but now with the manifolds out of the way, I can see that there's two holes.
In addition to the holes in the oil pan. It LOOKS like cylinders #1, 2, and 3 are dead.
When I put the intake manifold upside down, the oil started pouring out of the cylinder #6 runner.
The air filter was so soaked with oil, it literally came dripping outta the filter. It's crazy.
I also took the battery cables out & sold them. I ll just make new set when I drop the new motor in.
A guy on NAXJA was selling bunch of stuff and he had a set of MJ bastard packs that he built like 10 years ago along with 1/4" wall driveshaft in perfect length I needed. So I had him deliver them to my house.
No problem. I ll just take the leaves apart and hit with a wire wheel & give them a coat of paint. What kind y'all recommend. Tractor paint or something?
I also bought a set of LWB sliders from a member on comancheclub. (krustyballer). Had to shoot a coat of primer on it immediately when I got home cause it was raining and I had to bring the sliders home on the top of the jeep. Didn't want it to start rusting bad.
That's it so far, I think.
07-21-2018, 10:17 PM
#434
CF Veteran
Join Date: May 2015
Location: Arizona
Posts: 4,481
Likes: 0
Received 16 Likes
on
12 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Took the wiring harness off while labeling each connection. Also labeled the vacuum stuff.
Took both manifolds off...
Originally thought theres just one hole on the side but now with the manifolds out of the way, I can see that there's two holes.
Attachment 403246
In addition to the holes in the oil pan. It LOOKS like cylinders #1, 2, and 3 are dead.
When I put the intake manifold upside down, the oil started pouring out of the cylinder #6 runner.
The air filter was so soaked with oil, it literally came dripping outta the filter. It's crazy.
I also took the battery cables out & sold them. I ll just make new set when I drop the new motor in.
A guy on NAXJA was selling bunch of stuff and he had a set of MJ bastard packs that he built like 10 years ago along with 1/4" wall driveshaft in perfect length I needed. So I had him deliver them to my house.
Attachment 403248
No problem. I ll just take the leaves apart and hit with a wire wheel & give them a coat of paint. What kind y'all recommend. Tractor paint or something?
I also bought a set of LWB sliders from a member on comancheclub. (krustyballer). Had to shoot a coat of primer on it immediately when I got home cause it was raining and I had to bring the sliders home on the top of the jeep. Didn't want it to start rusting bad.
Attachment 403247
That's it so far, I think.
Took both manifolds off...
Originally thought theres just one hole on the side but now with the manifolds out of the way, I can see that there's two holes.
Attachment 403246
In addition to the holes in the oil pan. It LOOKS like cylinders #1, 2, and 3 are dead.
When I put the intake manifold upside down, the oil started pouring out of the cylinder #6 runner.
The air filter was so soaked with oil, it literally came dripping outta the filter. It's crazy.
I also took the battery cables out & sold them. I ll just make new set when I drop the new motor in.
A guy on NAXJA was selling bunch of stuff and he had a set of MJ bastard packs that he built like 10 years ago along with 1/4" wall driveshaft in perfect length I needed. So I had him deliver them to my house.
Attachment 403248
No problem. I ll just take the leaves apart and hit with a wire wheel & give them a coat of paint. What kind y'all recommend. Tractor paint or something?
I also bought a set of LWB sliders from a member on comancheclub. (krustyballer). Had to shoot a coat of primer on it immediately when I got home cause it was raining and I had to bring the sliders home on the top of the jeep. Didn't want it to start rusting bad.
Attachment 403247
That's it so far, I think.