97-01 Dash Swap.
#1
Member
Thread Starter
Join Date: Feb 2015
Location: Three Rivers Mi
Posts: 283
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
97-01 Dash Swap.
Any members do this? I have a donor 99 that im pulling the motor/trans/tcase from for my 86. So I'm pulling the dash and doing it as well. I'll post progress as I go.
#2
yes, my 89 has a 97+ interior and drive line. You have to change it all...wiring harness, controllers, basically strip the MJ and start throwing Cherokee parts on it. The dash is not a swap, you will need to cut brackets off of cherokee and weld on MJ firewall. Check out comanche club, their is a few builds that will help you decide if this is the way you want to go. Once you commit, you are committed.
#3
Member
Thread Starter
Join Date: Feb 2015
Location: Three Rivers Mi
Posts: 283
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
yes, my 89 has a 97+ interior and drive line. You have to change it all...wiring harness, controllers, basically strip the MJ and start throwing Cherokee parts on it. The dash is not a swap, you will need to cut brackets off of cherokee and weld on MJ firewall. Check out comanche club, their is a few builds that will help you decide if this is the way you want to go. Once you commit, you are committed.
Trending Topics
#15
Member
Join Date: May 2010
Location: upstate, New York
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 1991 I6 4.0 HO
I was curious to see how the frame comes out from / attached to the cab.