hotroddenal

Howdy, i had my cherokee for about 2 years, now. saw this forum and decided to join, i have learned alot about it just by tinkering with it and having to work on it. Yes i know my spelling sucks. so bear with me. Other than that when i am not working on it i am beating the snot out of it off road.

HeavyMetal

hey welcome to the site man

Kyle

welcome to the forums, hope you see you around.

-Kyle

hotroddenal

silly me forgot to tell what kind of jeep i own lol. Its a 1993 Jeep Cherokee Country.

Kyle

is it stock, do you have any plans for it?

-Kyle

hotroddenal

yes and no. its got the walmart fog lights, 3 inch raiser blocks in the rear 2 inch coil spacers up front, rear sway bar removed. these were done to the jeep before i bought it. now, the only thing i did to it put a 3 core rad in it and replace pretty much the whole cooling system, and put a detroit locker in the rear. plans are as follows, 4.5 inch lift with 33's, skid plates, new rockers, and ive got an extra 4.0L engine from my parts jeep that i am going to build into a stroker engine. i have come to realize that alot of the bolts on the jeep will break before they come lose.

ktmracer419

my advice: ditch those blocks as soon as you can.

sounds like a good future plan though

hotroddenal

yea, i decided on the 4.5 rough country lift, cause its pretty cheap. and i figure its something good to start off with. might do the sye too, or might use the xfer case lowering blocks for now.

Kyle

definatly get rid of those blocks, you will want to do a SYE or at least a TC drop as a temp fix.

that RC lift isnt a bad budget lift at all, i think you will like it.

-Kyle

hotroddenal

33's too big for that type of lift or no.

AbadK5Blaz

Welcome to the forum