New Jeep XJ Owner

Thread Tools
 
Search this Thread
 
Old 11-17-2017, 09:14 PM
  #1  
CF Veteran
Thread Starter
 
RocketMouse's Avatar
 
Join Date: Nov 2017
Location: Southern Texas (former AZ & Aus)
Posts: 2,415
Received 249 Likes on 199 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: I6 4.0L
Talking New Jeep XJ Owner

Hi all!

Like some here, I've worked on Jeeps for years, but never had one of my own... even though I secretly have wanted an XJ of my own for a long time. Just something about that platform with the 4.0 that does it for me
This time the timing was right and just recently got myself an almost completely rust free '99 XJ with the much beloved I6. These things are so straight forward and easy to work on that it's not even funny compared to most other vehicles on the road. Plus parts being so readily available still for both OEM and aftermarket off-road applications at reasonable prices certainly helped my decision to pick one of these up for myself. And plan to have it a long, long time.
Only things I need to change on this one are a few worn steering components and I'm good to go. After building so many low and very fast cars.... I was really ready to trade the "go fast" for being able to "go anywhere" lifestyle

Last edited by RocketMouse; 11-17-2017 at 09:19 PM.
Old 11-18-2017, 06:27 AM
  #2  
CF Veteran
 
Bugout4x4's Avatar
 
Join Date: May 2015
Location: Arizona
Posts: 4,481
Likes: 0
Received 16 Likes on 12 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Default

Originally Posted by RocketMouse
Hi all!

Like some here, I've worked on Jeeps for years, but never had one of my own... even though I secretly have wanted an XJ of my own for a long time. Just something about that platform with the 4.0 that does it for me
This time the timing was right and just recently got myself an almost completely rust free '99 XJ with the much beloved I6. These things are so straight forward and easy to work on that it's not even funny compared to most other vehicles on the road. Plus parts being so readily available still for both OEM and aftermarket off-road applications at reasonable prices certainly helped my decision to pick one of these up for myself. And plan to have it a long, long time.
Only things I need to change on this one are a few worn steering components and I'm good to go. After building so many low and very fast cars.... I was really ready to trade the "go fast" for being able to "go anywhere" lifestyle
Welcome and good for you! There is a whole lot to be said for being able to get away from civilization and out in the sticks.
Old 11-20-2017, 08:47 PM
  #3  
CF Veteran
Thread Starter
 
RocketMouse's Avatar
 
Join Date: Nov 2017
Location: Southern Texas (former AZ & Aus)
Posts: 2,415
Received 249 Likes on 199 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: I6 4.0L
Default

[QUOTE=Bugout4x4;3441088]Welcome and good for you! There is a whole lot to be said for being able to get away from civilization and out in the sticks. [/QUOTE ]
Thanks... and I grew up in the what most people would call the sticks... and love it there.
I deal with the concrete jungle because I have to for work... but the sticks is where it's at for me... so was it passed time to get back into another 4x4...and always wanted to try the XJ platform.
So went searching for one that was straight, decent miles, and as close to rust free as possible. And boom... a '99 XJ was located.
Has needed a few little maint. TLC type things, but nothing major... just typical things that wear on not just Jeeps, but any vehicle. doing tie-rod ends and track bar tomorrow. then I should be good to go for a while.
Old 11-21-2017, 07:46 AM
  #4  
CF Veteran
 
Bugout4x4's Avatar
 
Join Date: May 2015
Location: Arizona
Posts: 4,481
Likes: 0
Received 16 Likes on 12 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Default

[QUOTE=RocketMouse;3441816]
Originally Posted by Bugout4x4
Welcome and good for you! There is a whole lot to be said for being able to get away from civilization and out in the sticks. [/QUOTE ]
Thanks... and I grew up in the what most people would call the sticks... and love it there.
I deal with the concrete jungle because I have to for work... but the sticks is where it's at for me... so was it passed time to get back into another 4x4...and always wanted to try the XJ platform.
So went searching for one that was straight, decent miles, and as close to rust free as possible. And boom... a '99 XJ was located.
Has needed a few little maint. TLC type things, but nothing major... just typical things that wear on not just Jeeps, but any vehicle. doing tie-rod ends and track bar tomorrow. then I should be good to go for a while.
Sounds great, Holler if you get stuck with anything!
Old 11-21-2017, 06:33 PM
  #5  
CF Veteran
Thread Starter
 
RocketMouse's Avatar
 
Join Date: Nov 2017
Location: Southern Texas (former AZ & Aus)
Posts: 2,415
Received 249 Likes on 199 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: I6 4.0L
Default

[QUOTE=Bugout4x4;3441875]
Originally Posted by RocketMouse

Sounds great, Holler if you get stuck with anything!
I've been wrenching since I was 15, but this is my first XJ. So I'm sure there will be questions occasionally. Thanks!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 11:45 PM.