Hello from Southwest Michigan!
#1
Junior Member
Thread Starter
Join Date: Feb 2011
Location: Michigan
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Hello from Southwest Michigan!
Hello everyone! I've owned my 1998 Jeep Cherokee 4x4 for about 2 months now. She's got 158,000 miles on her, and is in pretty good shape. There are a few things I am going to do, and some things I am going to change over the next few months.... That's why I'm here.
She was looking pretty rough when I got her....
But, since I'm a detailer by trade, that was no big deal. I took some of the trim off and repainted the fender flares (with Krylon Fusion).
After everything was painted... she got a full polish and wax.
........... Anyways. It should be a fun little project. The truck currently has a 2-ish" lift, with coil spacers and add-a-leaf's. I'm looking forward to installing a 3.5-4.5" lift this spring and changing out the wheels and tires, along with some other little things.
She was looking pretty rough when I got her....
But, since I'm a detailer by trade, that was no big deal. I took some of the trim off and repainted the fender flares (with Krylon Fusion).
After everything was painted... she got a full polish and wax.
........... Anyways. It should be a fun little project. The truck currently has a 2-ish" lift, with coil spacers and add-a-leaf's. I'm looking forward to installing a 3.5-4.5" lift this spring and changing out the wheels and tires, along with some other little things.
#3
Senior Member
Join Date: Dec 2010
Location: Michigan (Home state) Stationed in Montana
Posts: 882
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Grand Cherokee
Engine: 5.2L MPI V8 (318)
Lapeer!
Very nice Jeep, and welcome to the forum! I'm from Michigan also, good to see other mitten-people on the forum.
#4
Junior Member
Thread Starter
Join Date: Feb 2011
Location: Michigan
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Thanks, Guys.
My main issue now is that my track bar has taken a crap. I don't know if I can put on a adjustable bar because most of those say they are for trucks with 4"-6" of lift. But, I don't want to just replace it with a stock unit and have to go back an put a adjustable one on later (when I buy a new lift). Anyone know if a adjustable bar will fit on a mildly lifted (2") Jeep? I don't really care if the axle is a bit off for now... I just need to get rid of this wobble.
My main issue now is that my track bar has taken a crap. I don't know if I can put on a adjustable bar because most of those say they are for trucks with 4"-6" of lift. But, I don't want to just replace it with a stock unit and have to go back an put a adjustable one on later (when I buy a new lift). Anyone know if a adjustable bar will fit on a mildly lifted (2") Jeep? I don't really care if the axle is a bit off for now... I just need to get rid of this wobble.
#6
Junior Member
Thread Starter
Join Date: Feb 2011
Location: Michigan
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Trending Topics
#8
Senior Member
Join Date: Dec 2010
Location: Michigan (Home state) Stationed in Montana
Posts: 882
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Grand Cherokee
Engine: 5.2L MPI V8 (318)
Michigan people!
Hey, I'm from Oakland County, or around Lake Orion/Rochester if you know of those two areas. Hey, I added you as a friend as well, hope ya don't mind. Trying to get in contact with more wheelers around Michigan so maybe when summer rolls around we could all get something going!
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Aw4 Transmission 67xxx miles
JeepStephie99
Engines/Tranny/T-Case
14
11-19-2015 11:49 AM
frado2jr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
09-14-2015 09:14 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)