1996 XJ (Central Utah)
 

1996 Cherokee XJ 4.0 4dr 4WD SE Part-out | Four Corners Region | Provo Utah
PM me with offers.


Engine Bay------------
Distributor (broken field post)
Alternator (core)
4.0 wiring harness (pulled)
Intake manifold w/ throttle bodies (x2)
Fuel Rail (x2)
OEM injectors (1 complete set)
Throttle Cable Bracket
1996 PCM / ECM / ECU / engine computer (4.0L)
Flexplate (x2 both w/ shim + crank bolts)
Power steering pump
Steering box (core)
Radiator Fan Clutch (no blades)
A/C Misc hardware
Coolant reservoir
Washer fluid bottle / reservoir
Thermostat housing (x2)
Valve cover
Vacuum cruise control module (no reservoir)
Airbox
Airbox Hoses

Drivetrain------------
NSS (wires attached but no connector)
AW4 transmission computer / controller / TCU
Dana 30 high-pinion front axle + diff assembly / 3.55 final drive
Front Dirveshaft
Steering box
Steering rack/complete (pitman, track, tie rods, drag link)

Interior------------ (blue-gray)
OEM AM/FM-only head unit
Interior wiring harness (pulled)
Tachometer dash instrument cluster (crack in lower plastic front) 180,xxx miles
Airbag steering wheel w/ cruise buttons
E-brake handle
heater core
Intermittent wiper controller module

Body & Misc------------
Rear Quarter glass intact \ rear hatch glass intact
Doors:
rears have interior latches; rear passenger exterior latch/handle gone. All winders are sold. All interior door trim panels are sold.
Hood (small dent in front-passenger corner)
Jeep/Cherokee badges: rear, front quarters (scuffed, but not bad)
OEM diamond spoke alloy wheels with tires (2x gold—no tires)
OEM steel front skid plate


The body/shell is gone

https://i.imgur.com/BSPPgCZh.jpg

https://i.imgur.com/EchoiUrh.jpg

https://i.imgur.com/yfFYCndh.jpg https://i.imgur.com/HGq3ruMh.jpg

https://i.imgur.com/PG3hI5ch.jpg

https://i.imgur.com/037naVSh.jpg https://i.imgur.com/hF5ahoYh.jpg

https://i.imgur.com/rOPiIXyh.jpg https://i.imgur.com/xyUksgZh.jpg

Driver door panel
 

Hey if you are selling it, I will take the drivers side door panel.

.

Trailing/control arm brackets? Re-purposing steering shaft?
 

.

Back out of hibernation!



PM me with offers.

Hey man Got a pic of the fuel rail? I need to make sure it's the correct one I need

https://cimg2.ibsrv.net/gimg/www.che...842e5acfd4.jpg
https://cimg3.ibsrv.net/gimg/www.che...e59214d022.jpg

Does it have a nipple on both ends?

Nope. just the one on the "front" and the pressure check valve.

You looking for a renix rail?

Reading online. In order to use 99+ intake with renix engine, I gotta use 96 fuel rail or modify my renix rail

Well thems is both '96s as I kept the '98 intake+rail when I swapped the long block

Ah ok. Any throttle bodies

have a picture of the auto and 4x4 shifter cover/ bezel?

Still have the rear wiper motor assembly? how much?

And what kind of windows are they? power or manual?

Yup. the stock '96 ones pictured on the intakes up top.

Sorry, doors are gone now— hadn't updated this since the summer— no more bezels. Only glass I have is rear liftgate and rear quarters (4dr)

I think I still have the rear wiper motor assembly (if I managed to get it out of the liftgate). $20 +shipping