Heater control go with the dash?

I'll take the steering wheel.

56473

Thanks

 

Now that the snow has melted and I can get to this thing let me know if you want any more parts. I'll take a couple of pictures this evening when I get home but I want it gone soon. Most parts are free, you just pay shipping.


Still has axles, all the windows, and a bunch of other miscellaneous parts I didn't use. Going to the scrapyard by 6/15.

 

Still have the inside door handle panels, just the handle and panel surrounding them? Can I get some pics if you still have them?

 

What do you got left?
I could use interior trim pieces.
I'm missing everything above the window/dash line.
And I would love to see exterior photos to see what is left there too.

 

I've be interested in the all the door windows and the front door panels too if you're willing to pull them.

 

Sorry, I can't find them. They may have sold but I can't remember.


There's some exterior photos earlier in this thread but I'll take some more today.
The windows are in good shape but I don't think the interior panels are. I'll start pulling them out to weigh them and get back to you with a shipping quote.

 

I'd be very interested in the passenger front window if it's not all scratched up? Mine is basically destroyed...

 

What would the shipping to 88061 for the four door be? I am only looking for the doors and latch. nothing else inside, and no interior panels.


Greg

 

Thanks for your patience, I've got them off and I'm boxing them up for a shipping quote today. Did you want the windows, too? Another member on here asked for them first so he sortof had dibs... The interior latches are gone as well but the latching mechanism and exterior door handles are still there.

 

I am only looking for doors, I want to create a set of half doors for summer trips.

 

And I'm still very interested in the windows and doors panels.

 

Did the fuse block and harness go with the dash? Would take the harness from the starter relay to the fuse block as well!!!

 

Pardon the delays guys, "goin' through the big D, don't mean Dallas."

Windows haven't been removed yet in the pictures. Front doors are 42x40x10 at 41lbs each and rear doors are 42x32x10 at 29lbs each.
Shipped via FedEx, the front doors fall into the "oversized" category, so they're about $125 each to ship. Now, I haven't boxed them up and there's a chance I can get the rear doors into one box. If you're still serious, I'll bring them to work and try to lower the shipping cost.










Removing glass tonight, all of it is in good shape. Do you need the triangular sections of the front doors too? Here are the door panels:



The fuse block is still there and in good shape, it'll take me a little while to remove the entire harness but I believe it is all intact.

Window cranks and driver's side door handle:

 

They look good. I figure that should all easily ship together just put a window between each door panel. I don't need the triangle glass. But if they other person hasn't taken that cowl panel I'd be interested in that since I just picked up a silver Comanche and it's is broken to hell. And maybe the grill too..

 

Sorry Dude, cowl was sold. The grill is probably something I can fit right in with the box. If it fits it ships and shouldn't change the cost weight-wise. I can pack those windows better than just between the panels but it may not be until Thursday.