Mark this thread as Unsold
[FS] Feeler for ReMan fuel injectors
07-19-2013, 06:08 PM
#1
CF Veteran
Thread Starter
Join Date: Jan 2009
Location: Baltimore, Maryland
Posts: 1,964
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1994 1993
Model: Cherokee
Engine: 4.0
Feeler for ReMan fuel injectors
Hello all. I have a chance to get some completely remanufactured 703 and 784 "upgrade" fuel injectors but before I do I want to see if there was any interest as I would need to charge about $100 a set for them which would make them the highest priced sets on the forum I have seen. However these would be completely professionally remanufactured and not just tested and soaked over night etc. They are ultrasonically cleaned inside and out, bead blasted, pressure tested for leaks, high pressure back flushed, flow matched and rebuilt with ALL new parts. One year warranty. To quote Ebays requirement to meet this classification, "It is the functional equivalent of a new part and is virtually indistinguishable from a new part."
If I see there is a possible market for sets at this price I will get them but I would need to get a fair number to make a decent profit and don't want to get stuck. Thanks for looking.
If I see there is a possible market for sets at this price I will get them but I would need to get a fair number to make a decent profit and don't want to get stuck. Thanks for looking.
07-19-2013, 06:25 PM
#2
Member
Join Date: Aug 2008
Location: Brookville, OH
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Hello all. I have a chance to get some completely remanufactured 703 and 784 "upgrade" fuel injectors but before I do I want to see if there was any interest as I would need to charge about $100 a set for them which would make them the highest priced sets on the forum I have seen. However these would be completely professionally remanufactured and not just tested and soaked over night etc. They are ultrasonically cleaned inside and out, bead blasted, pressure tested for leaks, high pressure back flushed, flow matched and rebuilt with ALL new parts. One year warranty. To quote Ebays requirement to meet this classification, "It is the functional equivalent of a new part and is virtually indistinguishable from a new part."
If I see there is a possible market for sets at this price I will get them but I would need to get a fair number to make a decent profit and don't want to get stuck. Thanks for looking.
If I see there is a possible market for sets at this price I will get them but I would need to get a fair number to make a decent profit and don't want to get stuck. Thanks for looking.
Sign me up for a set. How soon can you get them?
Trending Topics
07-25-2013, 09:32 PM
#9
CF Veteran
Thread Starter
Join Date: Jan 2009
Location: Baltimore, Maryland
Posts: 1,964
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1994 1993
Model: Cherokee
Engine: 4.0
OK it looks like there might be enough interest for me to do this. I will see about getting this rolling and get back to whoever replied. It might take a bit as they need to get remanurfactured and come from elsewhere.
08-01-2013, 09:35 AM
#11
Member
Join Date: Sep 2012
Location: HBG, PA
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Shoot me a PM too. I have a question about them. I have a 98 and if i'm correct that was the year where they could take the 703's or 784's. Not quite sure which ones I would actually need.
